Instructions / Assembly

30
INSTALLATION INSTRUCTIONS
General
Product Inspection
Visually inspect the water heater for any possible
damage.
Check the rating plate on the water heater to make
sure the water heater was designed to be used with the
supplied type of gas (natural or LP).
Verify that all included supplied parts are present as
shown.
Water Heater Installation
Corrosive Atmosphere
NOTICE:
The water heater should not be installed near an air supply
containing halogenated hydrocarbons where contaminants
can enter the combustion air supply.
Avoid installing a water heater in any of the following
locations: beauty shops, dry-cleaning establishments,
photo processing labs, and storage areas for liquid
and powdered bleaches or swimming pool chemicals.
These locations often contain such halogenated
hydrocarbons.
The air supply containing halogenated hydrocarbons is
safe to breathe, but when passed through a gas flame,
corrosive elements are released that will shorten the life
of any gas-burning appliance.
Propellants from common spray cans or gas leaks from
A/C and refrigeration equipment are highly corrosive
after passing through a flame.
NOTICE:
The water heater warranty is void when the failure is due to
operation in corrosive conditions.
Remote Control
Remote Control Cable
Screws
Washers
Manual Gas Shut-off
Valve
Pressure Relief Valve
(Some models only)