Specification

PRINTED IN U.S.A. 06/17 WP FORM NO. RR102C-2M Rev. 13
I N TEGR ATED AIR & WATER
INTEGRATED HOME COMFORT
Features and Benefits
The tighter the commercial retrofit,
the more you will appreciate how this
water heater's compact size simplifies
installations. Choose from 80% Thermal
Efficiency models that range from
54,000 - 80,000 Btu/h and have a
maximum temperature setting of 160
degrees Fahrenheit.
Space Saver Design
Short heights and narrow jacket
diameters offer the ultimate in
installation flexibility.
Patented Technology
Proprietary steel formulation with
a unique coat of high temperature
porcelain enamel to maximize corrosion
resistance resulting in a superior tank
design.
Patented Anode Rods
Magnesium anode rods are used to
ensure corrosion resistance for a long
tank life.
Efficiency
Rigid foam insulation provides superior
insulating qualities, improves efficiency
and reduces operating costs. Our
patented process of injecting foam into
the insulating cavity adds additional
durability.
Automatic Controls
Control system is designed to shut off
gas if the pilot flame is extinguished.
Relighting is a safe, easy procedure.
Thermostat settings to 160°F. A built-in
gas pressure regulator assures even
gas flow.
Efficiency
Rigid foam insulation provides superior
insulating qualities, improves efficiency
and reduces operating costs. Our
patented process of injecting foam into
the insulating cavity adds additional
durability.
CSA/ASME Rated T&P Valve
Factory installed relief valve
Full Port, Full Flow Brass
Drain Valve
Factory installed brass drain valve
allows for faster draining and servicing.
High Altitude Compliant
Some models are certified for
applications up to 8,500 feet above
sea level. Please consult factory for
certification requirements.
Warranty
3-Year limited tank warranty
See Commercial Warranty Certificate for
complete information
Efficiency | These models have been tested
according to DOE test procedures, and meet or
exceed the thermal efficiency and standby loss
requirements of current ASHRAE standards (Part of
the Federally mandated Energy Policy Act (EPact)).
Also exceeds energy efficiency codes of all states
including California Energy Commission (CEC).
Safety and Construction | These products are
design certified by CSA Laboratories: a) For operation
at 160°F. b) To meet all safety and construction
requirements of ANSI Z21.10.1/ANSI Z21.10.3. c) As
an automatic storage water heater. d) For operation
of combustible floors and alcove installations. e)
For combination water heating and space heating
applications. All models are North Carolina and
Massachusetts Code compliant. Certified for 150
PSI maximum working pressure.
Medium duty gas commercial water heaters
feature a compact design for greater installation
flexibility in tight retrofit applications
Rheem
Medium Duty
48 to 100-Gallon Capacities
54,000 to 80,000 Btu/h
Natural and LP Gas
Water
INTEGRATED HOME COMFORT
Commercial Gas
Medium Duty Water Heaters
See specifications chart on back.