Specification

PRINTED IN U.S.A. 06/18 WP FORM NO. THD-102C-50 Rev. 1
4
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 1115 Northmeadow Parkway, Suite 100
Roswell, Georgia 30076 • www.rheem.com
Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Brampton, Ontario L6Y 0P5 • www.rheem.com
Water
Commercial Gas
Triton Water Heaters
I N TEGR ATED AIR & WATER
INTEGRATED HOME COMFORT
Recommended Specifications
(for trade reference only)
Water heater(s) shall be Triton Model __________________ # or equal,
manufactured by Rheem, having a gas input of ______________ BTU/h
and recovery rate of _________ GPH at a 100°F temperature rise and
tested and certified at a Min. of .95 thermal efficiency, with a maximum
hydrostatic working pressure of 150 psi and minimum Inlet Gas
Pressure 3.5" in WC. Water heater(s) shall 1.) Modulating gas
burner that automatically adjusts the input based on demand.
2.) Power anodes that are non-sacrificial and maintenance free.
3.) Have the CSA seal of certification and supplied with a factory
installed CSA/ASME rated temperature and pressure relief valve, and
meet SCAQMD rule 1146.2. 4.) Shall have a wet-base design and
furnished with US Patent heat exchange system with two sided coating
high temperature porcelain enamel. 5.) Have 2" NPT front and rear,
(1) 1-½" NPT Top water connection. 6.) Have a 3 year standard
warranty.
The control shall be an integrated 4.3" Color touch screen with the
ability to perform 1.) Health alerts on tank and combustion system,
giving user advanced notice of any issues. 2.) Integrated Leak sense
™
leak detection system giving users advanced notice of catastrophic
failure. 3.) The control shall have integrated WiFi allowing the user
to connect to a cloud, and control & remote monitor the system via
EcoNet
®
app.
For Standard power vent, water heater shall be suited 2", 3", 4" or 6"
__________ pipe for a total maximum venting of 185 ft. For Power
Direct Vent water heater shall be suited for 2", 3", 4" or 6" _________
pipe for a total maximum vent length, intake 120 ft, exhaust 135 ft.
Water heater (s) shall be able to vent with the following materials:
Polypropylene, PVC, CPVC, ABS, & InnoFlue
®
flex venting.
*Weights listed are for non-ASME. Add 35 lbs. for ASME models.
FLEX VENT LENGTHS
POWER VENT ONLY
AP19355 – 50' OF 3" PP FLEX PIPE
AP19356 – 25' OF 3" PP FLEX PIPE
MODEL NUMBER
PIPE DIAMETER 3"
GHE80SU-130(A) 60
GHE80SU-160(A) 60
GHE80SU-200(A) 60
GHE80SU-300(A) 60
GHE100SU-130(A) 60
GHE100SU-160(A) 60
GHE100SU-200(A) 60
GHE100SU-250(A) 60
GHE100SU-300(A) 60
GHE100SU-400(A) 60
0" CLEARANCE TO ALL COMBUSTIBLE SURFACES ON SIDES AND BACK; 6" FOR TOP.
(FOR CANADIAN INSTALLATIONS, PLEASE USE POLYPROPOLENE, ULC S636 PVC OR CPVC.)
NOTE: Equivalent 60 Ft with rigid & flexible pipe.
DIMENSIONAL INFORMATIONS (Shown in English and Metric)
MODEL
NUMBER
UNITS
A B C D E F G H I
VENT
SIDE WATER
CONNECTION
TOP
OUTLET
APPROX.
SHIP. WT.
(LB)*
INLET OUTLET
GHE80SU-130(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
600
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE80SU-160(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
600
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE80SU-200(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
650
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE80SU-300(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
650
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE100SU-130(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
725
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU-160(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
725
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU-200(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU-250(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU-300(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU-400(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
C
B
A
E
D
F
H
I
G
FRONT
BACK
CLEANOUT
2” NPT
WATER
INLET
T & P VALVE
LOWER
TEMPERATURE
PROBE
3/4 NPT
RECIRCULATION
RETURN
VENT
CONNECTION
3 INCH
(exhaust
elbow)
SUPPLY GAS
CONNECTION
INTAKE AIR
CONNECTION
3 INCH PVC
WATER
OUTLET
HEIGHT