Instructions / Assembly

35
Status Menu
The Status screen provides information on the current
operating status, diagnostics and sensors. This screen
also provides information on the WiFi status.
WI-FI STATUS: After selecting the Wi-Fi status function,
you will be brought to a prompt showing you the cur-
rent state of your water heater’s Wi-Fi and the ability
to set-up your water heater’s Wi-Fi.
MORE FUNCTION: Selecting the more function your heat-
er will bring you to a prompt showing you the current
temperatures of the lower/upper tank, Flue tempera-
ture, ECO switch state, and Auxiliary relay state.
Service Menu
The service screen provides information on the product
description, alarms, system health, and service alerts.
Alarm details can be found in the "Before You Call Ser-
vice" section of the manual.
In case there is an active alarm, the "Service" button
will blink on the home screen. Pressing the "Service"
button will show a new screen containing the active
alarms and alarm history.
User Interface
By pressing the Status button, you will
be taken to a prompt showing the state
of your water heater’s many features.
By selecting the service function,
you will be taken to a prompt
giving you access to the heater’s
alarms, health, and alerts.
By selecting Wi-Fi status, you can
access the status of your water
heater’s Wi-Fi and even set it up.
By selecting more, you can access
the temperatures of your water
heater, ECO switch state, and
auxiliary switch state.
Selecting the Wi-Fi setup function
will bring you to a prompt allow-
ing you to connect your water
heater to your home Wi-Fi.
Current Alarms and Alarm
History allows you to
access any current alarms
that have been tripped and
view a list of previous
alarms.
System Health
will show you the
status of the tank’s
combustion health
and overall tank
health.
Service Alerts will allow
you to set how often you
want to be alerted to check
venting, clean the drain
trap, replace the neutralizer,
and to drain and inspect
the tank.
Status: Standby
StatusSettings
warm hot very hot
Disable
120°
Service
Status: Standby
StatusSettings
warm hot very hot
Disable
120°
Service
Status: Standby
Gas Line Press. Switch
Gas Valve State
Fan Prove Press. Switch
Air Intake Press. Switch
Exhaust Press. Switch
Current Fan Speed
Flame Current
Open
Closed
Open
Closed
Closed
0 RPM
0.0 uA
morewifi status
wifi status
WiFi Device Status............
WiFi Signal Strength [dBm]....
Econer wifi SW Version........
WiFi Module SW Version........
MAC Address...................
SSID..........................
IP Address ...................
Subnet Mask...................
Gateway.......................
Ready To Connect
0
RH-WIFI-02-01-05
14.76.36.P103
F0-03-8C-B3-C6-CC
wifi setup
Status: Standby
Upper Tank Temp
Lower Tank Temp
Flue Temperature
ECO Switch State
Auxiliary Relay State
159.8°
68.6°
92.7°
Closed
None
service
Product Model Number:
Product Serial Number:
Software Version Number: WH-GHE1-00-00-86
current
alarms
alarm
history
system
health
service
alerts