Instructions / Assembly

36
User Interface
ALARMS: The current alarms function allows you to see
any problems that have been detected by your water
heater. Also, by selecting on the current alarm you can
press “more info” to read more on the current problem
of your water heater. Alarm history allows you to see
any of the previous alarms that have gone off in the
past and give you the ability to clear those previous
alarms.
ALARM HISTORY: The alarm history function allows you
to see the previous alarms that have been detected by
your water heater in the past.
SYSTEM HEALTH: The system health function allows you
to see the current health of your hot water heater’s
combustion health and tank health status. The com-
bustion health and tank health each have three levels
of health:
SERVICE ALERTS: By selecting the Service alerts func-
tion you will be able to adjust how often you want to be
alerted to drain and inspect the tank, clean the drain
trap, check the venting, and to replace the neutralizer.
current alarms
A007 Exhaust Switch open. Check Wiring/Venting
more
info
clear
service alerts
Drain & Inspect Tank:
Check Venting:
Clean Drain Trap:
Replace Neutralizer:
Enabled
Enabled
Enabled
Enabled
9 months
6 months
1500 hours
1500 hours
9.0 left
6.0 left
1500 left
1500 left
By selecting “more info” you can
be given a more in-depth explana-
tion of the current alarm.
The health of your system’s combustion system and overall health
can be seen here. This screen be accesed by tapping the health indi-
cator icons on the home screen.
This symbol will appear on your home
screen if your combustion health is
critical. Pressing this icon will take the
user to the Health Status Screen
This symbol will appear if your
tank health status has reached criti-
cal. Pressing this icon will take the
user to the System Health Screen
By selecting an option and then using the up and down
arrow, you can set how often you’d like to be alerted to
system maintenance.
Trouble-Shooting
A007 Exhaust Switch open. Check Wiring/Venting
Check switch wiring and venting. If problem
persist, please contact technical support or
servise provider.
alarm history
14:48:13 01/11/17 A007 Echaust Switch open. Check wiring/venting
clear
COMBUSTION HEALTH:
1. Normal operation
-no action needed
2. Reliability Decreasing
-begin planning for
service and/or replace-
ment.
3. Needs Servicing
-contact your service
provider
TANK HEALTH:
1. Powered anode protect-
ing tank
-no action needed
2. Anode protection ending
-begin planning for ser-
vice and/or replacement.
3. Anode no longer protect-
ing tank.
-contact your service
provider
system health
(typical 10K cyc/yr)
(typical 2K hrs/yr)
Combustion Health Status: Operating Normally
Tank Health Status: Powered Anode Protecting Tank
Lifetime Heating Cycles:
Lifetime Run Time Hours:
0
0.0
Status: Standby
StatusSettings
warm hot very hot
Disable
120°
Service