Specification

PRINTED IN U.S.A. 12/20 WP FORM NO. RR102C-50 Rev. 9
4
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 1115 Northmeadow Parkway, Suite 100
Roswell, Georgia 30076 • www.rheem.com
Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Brampton, Ontario L6Y 0P5 • www.rheem.com
Water
Commercial Gas
Triton Water Heaters
I N TEGR ATED AIR & WATER
INTEGRATED HOME COMFORT
Recommended Specifications
(for trade reference only)
Water heater(s) shall be Triton Model __________________ # or equal,
manufactured by Rheem, having a gas input of ______________
BTU/h and recovery rate of _________ GPH at a 100°F temperature
rise and tested and certified at a Min. of 95% thermal efficiency, with a
maximum hydrostatic working pressure of 150 psi and minimum Inlet
Gas Pressure 3.5" in WC. Water heater(s) shall 1.) Include a modulating
gas burner that automatically adjusts the input based on demand.
2.) Have Power anodes that are non-sacrificial and maintenance free.
3.) Have a factory installed CSA/ASME rated temperature and pressure
relief valve, meet SCAQMD rule 1146.2 and include the CSA seal of
certification 4.) Have a wet-base design and furnished with a heat
exchange system with both sides coated in high temperature porcelain
enamel. 5.) Have 2" NPT front and rear, (1) 1-½" NPT Top water
connection. 6.) Have a 3 year (SU) or 5-year (SS) standard warranty.
The control shall be an integrated 4.3" Color touch screen with the
ability to 1.) Provide user advanced notice of any issues with health
alerts on tank and combustion system. 2.) Give users advanced notice
of catastrophic failure with Integrated LeakSense
™
leak detection.
3.) Automatically turn off water in the event of a failure with Integrated
LeakGuard
™
Auto Shut-Off Valve (SS model only). 4.) Report water &
energy usage reports via app or control. (SS model only) 5.) Connect
to a cloud, and control & remote monitor the system via the EcoNet
®
app through integrated WiFi. 6.) Connect to a Building Management
System without the need of any accessories using an integrated
BacNet MS/TP connection. (SS model only).
For Standard power vent, water heater shall be suited 2", 3", 4" or
6" __________ pipe for a total maximum venting of 185 ft. For Power
Direct Vent water heater shall be suited for 2", 3", 4" or 6" _________
pipe for a total maximum vent length, intake 120 ft, exhaust 135
ft. Water heater(s) shall be able to vent with the following materials:
Polypropylene, PVC, CPVC, ABS, & InnoFlue
®
flex venting.
*Weights listed are for non-ASME. Add 35 lbs. for ASME models.
FLEX VENT LENGTHS
POWER VENT ONLY
AP19353 – 50' OF 3" PP FLEX PIPE
AP19354 – 25' OF 3" PP FLEX PIPE
MODEL NUMBER
PIPE DIAMETER 3"
GHE80SU/SS-130(A) 60
GHE80SU/SS-160(A) 60
GHE80SU/SS-200(A) 60
GHE80SU/SS-300(A) 60
GHE100SU/SS-130(A) 60
GHE100SU/SS-160(A) 60
GHE100SU/SS-200(A) 60
GHE100SU/SS-250(A) 60
GHE100SU/SS-300(A) 60
GHE100SU/SS-400(A) 60
0" CLEARANCE TO ALL COMBUSTIBLE SURFACES ON SIDES AND BACK; 6" FOR TOP.
(FOR CANADIAN INSTALLATIONS, PLEASE USE POLYPROPOLENE, ULC S636 PVC OR CPVC.)
NOTE: Equivalent 60 Ft. with rigid & flexible pipe.
DIMENSIONAL INFORMATIONS (Shown in English and Metric)
MODEL
NUMBER
UNITS
A B C D E F G H I
VENT
SIDE WATER
CONNECTION
TOP
OUTLET
APPROX.
SHIP. WT.
(LB)*
INLET OUTLET
GHE80SU/SS-130(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
600
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE80SU/SS-160(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
600
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE80SU/SS-200(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
650
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE80SU/SS-300(A)
Inches 67-7/8 57.43 26-3/8 13 12-1/2 60-1/2 10-5/8 63-5/8 70-1/16
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
650
MM 1724 1459 668 331 318 1537 270 1617 1780
GHE100SU/SS-130(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
725
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU/SS-160(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
725
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU/SS-200(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
2", 3", 4"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU/SS-250(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU/SS-300(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
GHE100SU/SS-400(A)
Inches 77 66-3/4 26-3/8 13 12-1/2 69.80 10-5/8 72-3/4 77-1/2
3", 4", 6"
2"
NPT
2"
NPT
1.5"
NPT
775
MM 1956 1696 668 331 318 1773 270 1847 1969
C
B
A
E
D
F
H
I
G
FRONT
BACK
CLEANOUT
2” NPT
WATER
INLET
T & P VALVE
LOWER
TEMPERATURE
PROBE
3/4 NPT
RECIRCULATION
RETURN
VENT
CONNECTION
3 INCH
(exhaust
elbow)
SUPPLY GAS
CONNECTION
INTAKE AIR
CONNECTION
3 INCH PVC
WATER
OUTLET
HEIGHT