Specification Sheet

PRINTED IN U.S.A. 09/13 WP FORM NO. PROE RHPOU
INTEGRATED HOME COMFOR
T
INTEGRATED HOME COMFORT
Professional Classic
™
Point-of-Use electric
water heaters feature a space-saving design
for installation in limited spaces
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
Energy Factor based on D.O.E. (Department of Energy) test procedures.
*For double element, substitute “2” suffix for “1”. Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.).
• 2.5gallonmodel: 1⁄2” N.P.T. inlet and outlet. Relief valve connection 3⁄4”.
Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w)
Power cord supplied with 120 volt models only.
• 6through30gallonmodels: 3⁄4” N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring.
Water heaters furnished standard with 120 volt AC, 2000 watt single element.
Special wiring options – a limited number of wiring options are available. Consult factory for price and availability.
CONSTRUCTIONDETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be
connected directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.
Efficiency
• .93 EF for 30-gallon model
• Single resistored stainless steel
heating element to prolong anode
rod and tank life
Features
• High efciency heating element
•
Over-temperature protector cuts off
power in excess temperature situations
• Automatic thermostat keeps water at
desired temperature
• Wall bracket for easy wall mount
installations and corrosion resistant
1/4 turn drain valve included with
2.5 gallon model
Plus…
• Temperature and pressure relief valve
• Exclusive Rheemglas
®
tank lining
resists corrosion and prolongs tank life
• Meets or exceeds National Appliance
Energy Conservation Act (NAECA)
requirements
• These units are U.L. listed and comply
with Underwriter’s Laboratories
Specifications 174
• Enhanced-ow brass drain valve on
2.5-gallon model
• Low lead compliant
Warranty
• 6-Year limited tank and parts
warranty.*
* See Residential Warranty Certificate for complete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
Professional Classic
Point-of-Use
2.5, 6, 10, 15, 19.9 and
30-Gallon Capacities
120 Volt AC
2-Wire Single Phase
Electric
A
B
WATER CONNECTIONS ALL 1/2" N.P.T.
RELIEF VALVE CONNECTIONS 3/4" N.P.T.
C
DIAMETER
HOT WATER
CONNECTION
COLD WATER
CONNECTION
RELIEF VALVE
CONNECTION
3-1/2"
2-1/2 GALLON MODEL
C
HOT
WATER
OUTLET
COLD
WATER
INLET
RELIEF VALVE
B
E
A D
ANODE
ROD
6, 10, 15, 20 AND
30 GALLON MODELS
6, 10, 15, 19.9
and 30-Gallon
2.5-Gallon
Water
INTEGRATED HOME COMFORT
Residential Electric
Professional Classic
Point-of-Use Water Heaters
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
HT. TO HOT HT. TO SIDE HT. TO COLD APPROX.
GAL. HEIGHT WATER OUTLET DIAMETER T&P VALVE WATER INLET SHIP WT. ENERGY
CAP. MODEL NUMBER A B C D E (LBS.) FACTOR
2.5 PROE2 1 RH POU 14 14 9-3/4 – – 22 N/A
6 PROE6 1 RH POU 15-1/4 12-1/2 15-3/4 11-1/2 4-1/4 36 N/A
10 PROE10 1 RH POU 23 20-1/2 15-3/4 19-1/2 4-1/4 46 N/A
15 PROE15 1 RH POU 24-1/4 22 17-3/4 21 4-1/2 54 N/A
19.9 PROE20 1 RH POU 25-1/4 22-3/4 19-3/4 21-3/4 5 69 N/A
30 PROE30 1 RH93 POU* 30 23 21-3/4 23 2-3/4 91 0.93