Use and Care Manual

46
▪ B. LCD DISPLAY DESCRIPTIONS
▪ C. START-UP SEQUENCE
Figure 29 – LCD Display Detail
LCD also features a backlit lamp that will illuminate:
• When a user action is detected (a button is pressed)
• The display will turn off after approximately 20 seconds if no buttons are pressed
After the appliance is powered ON, the LCD display shows a sequence of information. The icons will ash, followed by various indicators that
describe the appliance controller and software versions. It will take the appliance roughly 15 seconds to cycle through the Start-Up Sequence.
Table 19 – Start-Up Sequence
Display Items Time for Display Remarks
LCD Test
1 Sec All segments “ON”
0.5 Sec All segments “OFF”
Category
1 Sec Pdn
1 Sec 0051
Software Version for Front Panel
1 Sec SPn
1 Sec 00.XX
Software Version for Appliance
1 Sec SFn
1 Sec XX.XX
Hardware Version for Appliance
1 Sec Hdn
1 Sec 00XX
AUTODESK � � � � � � � � � �
AUTODESK � � � � � � � � � �
AUTODESK � � � � � � � � � �
AUTODESK � � � � � � � � � �
Clock
DHW Preheat Scheduled Hours
Current and DHW Preheat scheduled Day
Internal Pump Icon
Heating activated Icon
Status Display
DHW High Temperature Icon
Temperature Unit
Lock Mode Icon
Communication Status
Burner ON Icon
External Pump(Heating) Icon
Air Handler Icon
Warm Weather
Cutoff Icon
DHW Preheat
activated Icon
Outdoor Reset Icon
DHW activated Icon
DHW Preheat Timer Icon
Information Icon
Freeze
Prevention Icon