RF1P Spec Sheet
Engineering Features
RF1T/RF1P Series
WeatherKing 3
Engineering Features
RF1T/RF1P- Series
• The most compact unit design available, all standard heat air
handler models only 36" [915 mm].
• Rugged wall steel cabinet construction, designed for added
strength and versatility.
• 1.0" foil faced insulation for excellent thermal and sound
performance.
• Four leg blower motor mount.
• Traditional open wire element design for heat applications.
• Indoor coil design provides low air side pressure drop, high
performance and extremely compact size.
[ ] Designates Metric Conversions
• Coils are constructed of aluminum fins and internally grooved
aluminum tubing.
• Molded polymer corrosion resistant condensate drain pan is
provided for all indoor coils.
• Connection point for high voltage wiring is inside the air han-
dler cabinet. Low voltage connection is made on the outside
of the air handler cabinet.
• Concentric knockouts are provided for power connection to
cabinet. Installer may pull desired hole size up to 1
3
/8 inch
inches [35 mm] for
7
/8 inch [22 mm] conduit.