Specification Sheet

ManualsBrandsRheem ManualsDomestic AppliancesX-13

Rheem Air Handlers

FORM NO. H11-549

RHLP- Standard Efficiency

X-13 (ECM) Motor

• RHLP features an X-13 (ECM) motor which provides enhanced

SEER performance with most Rheem outdoor units.

•1

/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between

/2 to 55

/2 inches [1080 to 1410 mm] tall and 22 inches

[559 mm] deep.

• Versatile 4-way convertible design for upflow, downflow, hori-

zontal left and horizontal right applications.

• Factory-installed high efficiency indoor coil.

• All models meet or exceed 330 to 400 CFM [156 to 189 L/s]

per ton at .3 inches [.7 kPa] of external static pressure.

• Enhanced airflow up to .7" external static pressure.

• Sturdy construction with 1.0 inch [.24 kPa] of reinforced foil

faced jacket insulation for excellent thermal and sound

insulation.

• Field-installed auxiliary electric heater kits provide exact heat

for indoor comfort. Kits include circuit breakers which meet UL

and cUL requirements for service disconnect.

• Suitable for R-410A or R-22 Refrigerants with piston change.

Air

Air Handlers

RHLP Series

Summary of content (16 pages)

PAGE 1
Air Air Handlers RHLP Series Rheem Air Handlers RHLP- Standard Efficiency X-13 (ECM) Motor • RHLP features an X-13 (ECM) motor which provides enhanced SEER performance with most Rheem outdoor units. • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep. • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. • Factory-installed high efficiency indoor coil.
PAGE 2
Air Table of Contents RHLP Series TABLE OF CONTENTS Engineering Features ......................................................................................3 Model Number Identification ............................................................................4 Dimensional Data............................................................................................5 Airflow Directional Data ..................................................................................
PAGE 3
Air Engineering Features RHLP Series Engineering Features RHLP- Series ■ The most compact unit design available, all standard heat air handler models only 421/2 to 551/2 inches [1079 to 1409 mm] high. ■ Attractive pre-painted cabinet exterior. ■ Rugged wall steel cabinet construction, designed for added strength and versatility. ■ 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. ■ Four leg blower motor mount.
PAGE 4
Air Model Number Identification RHLP Series Model Number Identification R H L P — HM 24 17 J A Design Variation A = 1st Design Voltage A = 115/1/60 J = 208/240/1/60 Cabinet Size 17 = 17.5" [431.8 mm] (600-1200 CFM) 21 = 21" [533.4 mm] (1400-1600 CFM) 24 = 24.5" [609.6 mm] (1600-1800 CFM) Capacity 24 = 18,000/24,000 BTU/H [5.27/7.03 kW] 36 = 30,000/36,000 BTU/H [8.79/10.55 kW] 48 = 42,000/48,000 BTU/H [12.31/14.
PAGE 5
Air Dimensional Data RHLP Series Unit Dimensions SUPPLY AIR ELECTRICAL CONNECTIONS MAY EXIT TOP OR EITHER SIDE 7/8 [22.2 mm], HIGH VOLTAGE CONNECTION 13/32 [27.8 mm], 131/32 [50 mm] DIA. KNOCKOUTS. NOTE: 24 CLEARANCE REQUIRED IN FRONT OF UNIT FOR FILTER AND COIL MAINTENANCE. 105/16 [262 mm] W Return Air Opening Dimensions A LOW VOLTAGE CONNECTION 5/8 [15.9 mm] AND 7/8 [22.
PAGE 6
Air Airflow Directional Data RHLP Series Airflow Directional Data UPFLOW HORIZONTAL LEFT HAND AIRFLOW 6 DOWNFLOW HORIZONTAL RIGHT HAND AIRFLOW
PAGE 7
Air Airflow Performance Data RHLP Series Airflow Performance Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .
PAGE 8
Air Airflow Performance Data RHLP Series 115V/208V/240V/460V Airflow Performance Data—RHLP (X-13 (ECM) Motor) Model No. RHLP Tonnage Application Motor Speed From Factory Manufacturer Blower Size/ Recommended Motor Motor Air-Flow Range HP [W] Speed (Min/Max) CFM # of Speed 2 -2417 No Heater 1.5 Ton 5 509/681 CFM [240/321 L/s] 10x6 1/3 HP [249] 5 Speed 3 2 -2417 with 13 kW Heater 1.
PAGE 9
Air Airflow Performance Data RHLP Series 115V/208V/240V/460V Airflow Performance Data—RHLP (X-13 (ECM) Motor) (con’t.) Model No. RHLP Tonnage Application Motor Speed From Factory Manufacturer Blower Size/ Recommended Motor Motor Air-Flow Range HP [W] Speed (Min/Max) CFM # of Speed 2 -4821 No Heater 3.5 Ton 5 1337/1447 CFM [631/683 L/s] 10x10 3/4 HP [559] 5 Speed 3 2 -4821 with 20 kW Heater 3.
PAGE 10
Air Electrical Data RHLP Series Electrical Data – Blower Motor Only – No Electric Heat Model RHLP Voltage Application Phase* Hertz 1&3 60 1 60 2417 208/240 3617 4821/4824 2417 115 3617 4821/4824 * Blower motors are all single phase motors. [ ] Designates Metric Conversions 10 HP [W] RPM Speeds Circuit Amps. 1/3 [249] 1/2 [373] 3/4 [559] 1/3 [249] 1/2 [373] 3/4 [559] 300-1100 300-1100 300-1100 300-1100 300-1100 300-1100 4 4 4 4 4 4 1.6 2.7 3.8 4.8 6.8 8.4 Minimum Circuit Ampacity 2.0 4.
PAGE 11
Air Electrical Data RHLP Series Electrical Data – With Electric Heat Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Model RHLP 2417 Heater Model No. Heater KW 208/240V PH/HZ No. Elements KW Per Type Supply Circuit Single Circuit Multiple Circuit Circuit Amps.
PAGE 12
Air Electrical Data RHLP Series Electrical Data – With Electric Heat (con’t.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Model Heater Model No. Heater KW 208/240V PH/HZ No. Elements KW Per Type Supply Circuit Single Circuit Multiple Circuit Circuit Amps.
PAGE 13
Air Electrical Wiring RHLP Series Electrical Wiring Power Wiring Grounding • Field wiring must comply with the National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • This product must be sufficiently grounded in accordance with National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • Supply wiring must be 75°C minimum copper conductors only. • See electrical data for product Ampacity rating and Circuit Protector requirement.
PAGE 14
Air Limited Warranty RHLP Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. 14 Conditional Parts (Registration Required) ..........
PAGE 15
Air Notes RHLP Series 15
PAGE 16
The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 11/12 QG FORM NO.