Specification

04/14 FORM NO. THD-PEPOU
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
PERFORMANCE
™
Point-of-Use electric
water heaters feature a space-saving design
for installation in limited spaces
Energy Factor based on D.O.E. (Department of Energy) test procedures.
• 2.5gallonmodel: 1⁄2” N.P.T. inlet and outlet. Relief valve connection 3⁄4”.
Available with 120 volt AC single phase only, 120v (1440w)
Power cord supplied with 2.5 gallon models.
• 6through30gallonmodels: 3⁄4” N.P.T. outlet, inlet, anode rod. T & P valve connections.
Water heaters furnished standard with 120 volt AC, 2000 watt single element.
CONSTRUCTIONDETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be connected directly to the water heater without special nipples or tees.
Efficiency
 .93 EF for 30-gallon model
 Single resistored stainless steel
heating element to prolong anode
rod and tank life
Features
 Upper heating element

Over-temperature protector cuts
off power in excess temperature
situations
 Automatic thermostat keeps water at
desired temperature
 Wall bracket for easy wall mount
installations and corrosion resistant
1/4 turn drain valve included with
2.5 gallon model
Plus…
 Temperature and pressure relief valve
 Meets or exceeds National Appliance
Energy Conservation Act (NAECA)
requirements
 These units are U.L. listed
and comply with Underwriter’s
Laboratories Specifications 174
 Low lead compliant
Warranty
 6-Year limited warranty for tank
and parts, 1-year full in-home labor
warranty*
*See written warranty for complete details
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
PERFORMANCE
Point-of-Use
2.5, 6, 10, 20 and
30-Gallon Capacities
120 Volt AC
A
B
WATER CONNECTIONS ALL 1/2" N.P.T.
RELIEF VALVE CONNECTIONS 3/4" N.P.T.
C
DIAMETER
HOT WATER
CONNECTION
COLD WATER
CONNECTION
RELIEF VALVE
CONNECTION
3-1/2"
2-1/2 GALLON MODEL
C
HOT
WATER
OUTLET
COLD
WATER
INLET
RELIEF VALVE
B
E
A D
ANODE
ROD
6, 10, 20 AND 30
GALLON MODELS
6, 10, 20 and
30-Gallon
2.5-Gallon
Tank Height to Hot Height to Side Height to Cold Ship
Gallon Model Height Water Outlet Diameter T&P Valve Water Inlet Element Weight Energy
Fuel Type Description Capacity Number A B C D E Wattage (LBS) Factor
Electric POU 30 XE30P06PU20U0 30 23 21-3/4 23 2-3/4 2000 91 0.93
Electric POU 20 XE20P06PU20U0 25-1/4 22-3/4 19-3/4 21-3/4 5 2000 70 N/A
Electric POU 10 XE10P06PU20U0 23 20-1/2 15-3/4 19-1/2 4-1/4 2000 46 N/A
Electric POU 6 XE06P06PU20U0 15-1/4 12-1/2 15-3/4 11-1/2 4-1/4 2000 36 N/A
Electric POU 2.5 XE02P06PU14U0 14 14 9-3/4 – – 1440 22 N/A
Electric Point-of-Use Specifications