Specification

PERFORMANCE
™
electric water heaters
are NAECA and HUD certified for Manufactured
Housing and modular construction
Efficiency
 .93 EF
 Isolated tank design reduces
conductive heat loss
 Dual 4500W copper heating elements
Performance
 FHR: Up to 50 gallons, based on
model
 Recovery rate is 21 gallons for 4500
watts at a 90° F rise**
Longer Life
 Premium grade anode rod provides
long-lasting tank protection
Features
 High performance and lower
operating cost
 Side inlet and outlet connections
 Compliant with H.U.D., ASHRAE
90A-80 and NAECA requirements
 Electric junction box located above
heating elements for easy installation
 Over-temperature protector cuts
off power in excess temperature
situations
 Automatic thermostat keeps water at
desired temperature
Plus…
 Temperature and pressure relief valve
included
 Low lead compliant
Warranty
 6-Year limited warranty for tank
and parts, 1-year full in-home labor
warranty*
*See written warranty for complete details
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
PERFORMANCE
Manufactured Housing
30 and 40-Gallon Capacities
240 Volt AC/Single Phase
Double Element Models
Recovery in First Hour Tank Height to Ship
Gallon Model G.P.H. Rating Height Water Conn. Diameter Weight Energy
Fuel Type Description Capacity Number 90° Rise G.P.H. A B C (LBS) Factor
Electric Tall 40 XE40T06MH45U0
†
21 50 46-3/4 40-1/4 19-3/4 106 0.93
Electric Tall 30 XE30T06MH45U0 21 46 45-3/4 39-3/4 17-3/4 86 0.93
Electric Manufactured Housing Specifications
04/14 FORM NO. THD-PEMH
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
Energy Factor based on D.O.E. (Department of Energy) test procedures.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt
heating elements.
* *Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W = 21 GPH
2.42 x 90°
C
A
B
RELIEF
VALVE
COLD
INLET
3"
HOT
OUTLET
WATER CONNECTIONS ALL 3/4" N.P.T.
COLD
OUTLET
HOT
OUTLET
JUNCTION
BOX
ANODE
†
LEED Point = 1