Use and Care Manual

Local Startup

Adjusting Temperature

High Temperature Enabling

Enabling / Disabling Unit

1) Press the "ON/OFF" button to turn on / en-

able unit.

*Unit will be disabled upon initial startup.

1) Press the "UP" button to increase tempera-

ture.

Enable high temperatures (+140°) by pressing

and holding both "UP" and "DOWN" buttons

for 3 seconds when temperature is set to 140°F.

*Maximum Temperature: 150°F (65°C). High

Temperature Setting will be disabled after 5

minutes if the user decreases the temperature

below 140°F (60°C).

Lock/Unlock Display

• Press and hold for 5 seconds both UP and

DOWN buttons to Lock/Unlock the Dis-

play. This prevents any change in Mode

of operation or set-point if any button is

pressed.

2) Press the "DOWN" button to decrease

temperature.

2) Press the "ON/OFF" button to

turn off/disable the unit.

*Scald warning will automatically appear at 120°F and higher. *Scald warning will automatically appear at 120°F and higher.