Operation Instructions

2/3 2020/5/6
Turn the light on or off by only touching the LIGHT button .
Keep pressing the button in excess of 0.7 second it becomes a dimmer ,
the light varies cyclically in 0.8 second .
One of the important feature of this control is AUTO-RESUME . After power
on , it allows the light return to where it was off .
7. Power switch
Turn off the power for Fan and Light
GENERAL INFORMATION :
This remote controller is designed to separately control your
ceiling fan speed and light brightness .
INSTRUCTIONS FOR INSTALLATION AND OPERATION OF FAN SPEED CONTROLLER
Setup for ceiling fan controller
1. Turn off the power. (In order to make sure the electricity is entirely released, please press any
button on the controller till no LED display showing)
2. Turn on the power
3. Press the FAN OFF button for more than 3 sec. The ceiling fan controller will has 2 blinks. It
means the setup is successful. You could start to control the ceiling fan light and fan speed.
NOTICE :
The changes or modifications not expressly approved by the
party responsible for compliance could void user’s authority
to operate the equipment .