THANK YOU for choosing a MDM Products product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
Warning: The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking this product check to make sure all parts listed on page 7 are included. If any parts are missing or broken, please call MDM Products at 1-800-447-7079.
Figure 4 Figure 3 Upright Pipe (6) Clip (9) Corner Frame Rail (3) Mounting Bracket and Gate Latch (10) Tension Bar (5) Straight Frame Rail (4) “U” Bolt (12) Back Plate (11) Installing the Door 1. Determine the location for the Door (1). The Door (1) must be set directly onto one Frame Rail. Do not have the Door (1) span two Frame Rails.
3. Always wear heavy duty work gloves when working with the Chain Roll (2). Unroll the Chain Roll (2) around the Shelter. As you go, secure the Chain Roll (2) to the top section of the frame with Tie Wires (7) about every 5 feet. Insert the Tie Wire (7) through the Chain Roll (2) and wrap it around the top Frame Rail. Using pliers, twist the Tie Wire (7) until the Chain Roll (2) is tightly in place. Repeat every 5 feet. 4.
DK75754JJ/DK751306JJ Please DO NOT return unit to store or dealer.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
DK75754JJ/DK751306JJ Please DO NOT return unit to store or dealer.