Full Product Manual

- 10 -
RH22V
User Guide
How to install the wall-mounted and
store the vacuum cleaner
Install the wall-mounted tool on wall with the plugs and
screws. Then put the vacuum cleaner on the hook as
shown in the drawing to store your device.
If the roller brush becomes blocked or jammed with debris, the vacuum will shut
down, or be less efficient.
The roller brush may then need to be cleaned. Switch off the device first and then
carefully use a pair of scissors or a sharp knife to remove any items such as hairs that
may have become entangled.
Cleaning of Wheel Axles
If a wheel is jammed with debris: remove the wheels by
carefully by using a screwdriver inserted into the cavity.
Remove any debris that may have jammed the wheel axles.
Reassemble the wheels by pressing them tightly together.
If the roller brush needs cleaning, push the lock button on the bottom of brush with a
finger or a coin, then uplift the lock button. Take out the brush. When the cleaning is
done, put the roller brush in place and push down the lock button. Note that the lock
button cannot be removed from the brush, only lift up.
NOTE: do not wash the roller brush with water.
Hardfloor Cleaning
Brush
Carpet Cleaning
Brush