Full Product Manual

RHDC2
- 10 -
How to Install the Wall Mount Bracket
Hanger
On drywall, install the included plastic sleeve anchors
first. Mark your hanging point and screw in place the
wall mount bracket hanger at a superior height than
the device itself. After installation, you will be able to
hang your device as illustrated.
The device will shut down if the turbo brush is jammed or has cumulated to much
debris.
If so, turn off the device and check for any debris causing the jam (often, hair or carpet
thread is the issue). We suggest using scissors or a sharp knife to free unwanted
debris.
Cleaning the Wheels
Consider cleaning the wheels periodically. Wheels can be
cleaned by plying out the wheel axle with a small screwdriver.
After cleaning, wheels can easily be snapped back in their
original socket by a simple thumb push.
User Guide
The Roll Brush itself might need cleaning.
IMPORTANT: Do not wash the Roll Brush with water.
Hardfloor Cleaning
Brush
Carpet Cleaning
Brush