Operator`s manual

MAINTENANCE
FN180/FN120 07/12 Maintenance Section 5-31
© 2012 Alamo Group Inc.
MAINTENANCE
TEM QTY DESCRIPTION
1. 1 Housing
2. 2 Input Thru Cap
3. 22 Hex Head Bolt
4. 3 ISO Cup & Cone Set
5. 3 Round End Key
6. 1 Nitro Input Shaft
7. 220oz Gear Lube Multi Purpose
8. 1 Oil Seal CR
9. VAR Input Cap Gasket .005”
10. VAR Input Cap Gasket .007”
11. VAR Input Cap Gasket .020”
12. 1 Tooth Gear
13. 1 Inspection Cover Cap
14. 2 Level Plug
15. 2 Sealer Washer
16. 6 Helical Lockwasher
17. 1 Bearing Spacer
18. 1 Blank Cap
19. 1 Cotter Pin
20. 1 Bearing Adjusting Nut
21. 1 16 Tooth Pinion
22. 1 Output Shaft
23. 1 ISO Cup & Cone Set
24. 1 Oil Seal
25. 1 Cotter Pin
26. 1 Hex Slotted Flange Nut
27. 1 Retaining Ring
28. 1 Blade Hub
29. VAR SD Gear Adj. Shim 0.40
30. VAR SD Gear Adj. Shim 0.30
31. VAR SD Gear Adj. Shim 0.50