User manual
RHO-Lens HPRO
Thank you for purchasing the RHO-Lens HPRO. The
HPRO improves your vision in the FPV video goggle
Headplay HD. Please take your time and read this
instructions carefully before you begin.
Features
Optimized focus point: 15.8 in (40 cm).
(Compared to 7.9 in (20 cm) or 7.1 in (18 cm) of the
Headplay HD.)
Optimized field of view: 57° diagonal.
(Compared to 72° or 68° of the Headplay HD.)
High-quality lenses for maximum clarity and
sharpness.
Super Anti-Reflection coatings to minimize
disturbing glare and light reflections.
Replaceable lenses.
Prescription lenses available for people with sight
defects or different needs. The standard lenses are
designed for a pupil distance of 25.2 in (64 mm).
Please contact us if you need a different pupil
distance, focus point or field of view.
Dustproofed and robust design.
Weight: 1.07 oz (30.3 g).
Installation
1. Put the video
goggle upside
down on a table.
Remove the 4
screws with a
screwdriver.
2. Lift off the
bottom part of
the casing.
Display, control
panel and lens
remain in the top
part.
3. Remove the
preinstalled
Fresnel lens.
Clean the display.
4. Put the HPRO
onto the nose
bridge of the
bottom part and
align it
perpendicular to
the casing.
5. Turn around the
bottom part and
close the casing.
Check that the
HPRO is clamped
in correct position
and parallel to
the display.
6. Close the casing
with the 4 screws.
Warning: This product contains strong optical lenses.
Do not look through the lenses into the sun or other
strong light sources. Eyes may be injured. Do not
expose the lenses to direct sun light. Concentrated light
rays may damage the video goggle or ignite a fire. Keep
away from children.
Contact
http://www.RHO-Lens.com
http://www.facebook.com/RHO2Lens
info@RHO-Lens.com
RHO-Lens
Bredeheide 19
48161 Münster
Germany
©2016 RHO-Lens. All rights reserved.
Headplay HD is a trademark of Rangevideo, LLC.
v1.0 10.2016