SDS

STEEL WOOL ALL GRADES
Product name
1.07
Product code
Date of issue
Version
00384691
16 November 2019
Section 8. Exposure controls/personal protection
Respiratory protection
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If workers
are exposed to concentrations above the exposure limit, they must use appropriate,
certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is necessary.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Solid.
Not available.
7.6
Not available.
Not available.
Insoluble in the following materials: cold water.
Characteristic.
Odor
pH
Not available.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: 250°C (482°F) [Product does not sustain combustion.]
Not available.
Not available.
Viscosity
Kinematic (40°C (104°F)): Not applicable.
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
Not available.
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
% Solid. (w/w)
:
100
Density ( lbs / gal )
:
63.43
Volatility
:
0% (v/v), 0% (w/w)
United States
Page: 5/10