Installation Guide

FCC ID: P27MDC450

IC : 5604A-MDC450

Mounting the Mini Dome Camera

*Note: Please ensure the Mini Dome Camera is configured and added

to the network before permanent mounting.

Ceiling Mounting

1. Identify the location where you would like to mount the camera.

Using the mounting template included in the box as a guide, drill

three mounting holes in the ceiling.

2. If you have not done so already, use the L tool to remove the three

screws and the bubble from the camera. Then remove the

protective foam as shown.

3. If using the anchors, insert them into the mounting holes.

4. Align the three mounting holes of the camera stand with the three

holes, and then mount the camera stand onto the ceiling using the

provided screws.

Figure 5: Installing the Screws

Note: It is recommended that you route the cable through the side

opening of the mounting base.