User's Manual

4-2. App Screen Displaying After DVR Connect

Instructions

⚫ Setting: Enter the setting page

⚫ Return to the connection screen: Enter the connection screen of the DVR.

⚫ Recording function button: Press to manually start/stop the DVR recording function.

⚫ Picture-in-picture switching: The monitoring picture-in-picture can be

arbitrarily switched to the following four modes

1. The front camera is the main screen, the rear camera is the sub one.

2. The rear camera is the main screen, the front camera is the sub one.

3. It only shows the front camera.

4. It only shows the rear camera.

⚫ Full-screen switching: Switch the user interface to upright or landscap

⚫ Photo shooting: Take the current picture immediately. (A DVR equipped

with dual recorders will shoot both front and rear images at the same time)

⚫ Video: When users browsing through the video in DVR, the recording

function will automatically pause

⚫ Photo: When users browsing through the photos in DVR, the recording

function will automatically pause

⚫ Note: DVR is synchronized with the date and time on the mobile

device through the App. If the battery is removed due to maintenance

or other factors, please re-use Wi-Fi through connecting to ensure the

correct recording times.

Video

Recording

Function Button

Setting

Return to the

connection screen

Photo