Specifications

TM 9-2350-311-34-1
(c) Install dial indicator on bracket and position on gear teeth (50) as shown.
(d) Hold driveshaft (39) to prevent movement and rotate bevel gearshaft (23) counterclockwise as far as
possible without forcing.
(e) Zero dial indicator and slowly rotate gearshaft (23) clockwise reading backlash measurement.
16 Add or remove shims (para 6-4) as required to obtain 0.004- to 0.008-in. (0.10- to 0.20-mm) backlash.
6-9