Specifications

TM 9-2350-311-34-1
b.
c.
4
5
6
7
8
9
Disconnect connector (2) at accessory control box (13).
Remove screw (14), washer (15), and nut (16) from slip ring segment board (17) and release lead (3).
Disconnect connector (1) at driver’s compartment bulkhead.
Remove two plastic straps (18), four screws (19), four Iockwashers (20), and four washers (21). Release
power lead and reinstall straps, washers, Iockwashers, and screws. Discard Iockwashers.
Remove 13 plastic straps (22), 13 screws (23), 13 Iockwashers (24), and 13 washers (25). Release power lead
and reinstall straps, washers, Iockwashers, and screws. Discard lockwashers.
Remove wiring harness from hull.
Disassembly
Disassemble wiring harness leads (TM 9-2350-311-20-1).
Assembly
Assemble wiring harness leads (TM 9-2350-311-20-1).
7-75