Specifications
SIM900 AT Commands Set        
SIM900_ATC_V1.01  105  23.06.2010 
character long hexadecimal number 
<dcs>  depending on the Command or result code: GSM 03.38 SMS 
Data Coding Scheme (default 0), or Cell Broadcast 
Data Coding Scheme in integer format 
<fo>  depending on the Command or result code: first octet of GSM 
03.40 SMS-DELIVER, SMS-SUBMIT (default 17), 
SMS-STATUS-REPORT, or SMS-COMMAND 
(default 2) in integer format 
<length>  integer type value indicating in the text mode (+CMGF=1) 
the length of the message body <data> (or <cdata>) 
in characters; or in PDU mode (+CMGF=0), the length 
of the actual TP data unit in octets (i.e. the RP layer 
SMSC address octets are not counted in the length) 
<mid>  GSM 03.41 CBM Message Identifier in integer format 
<oa>  GSM 03.40 TP-Originating-Address Address-Value field in 
string format; BCD numbers (or GSM default alphabet 
characters) are converted characters of the currently 
selected TE character set (specified by +CSCS in TS 
07.07); type of address given by <tooa> 
<pdu>  In the case of SMS: GSM 04.11 SC address followed by 
GSM 03.40 TPDU in hexadecimal format: ME/TA 
converts each octet of TP data unit into two IRA 
character long hexadecimal number (e.g. octet with 
integer value 42 is presented to TE as two characters 
2A (IRA 50 and 65)). In the case of CBS: GSM 
03.41 TPDU in hexadecimal format. 
<pid> GSM 03.40 TP-Protocol-Identifier in integer format (default 
0) 
<sca>  GSM 04.11 RP SC address Address-Value field in string 
format; BCD numbers (or GSM default alphabet 
characters) are converted to characters of the currently 
selected TE character set (specified by +CSCS in TS 
07.07); type of address given by <tosca> 
<scts>  GSM 03.40 TP-Service-Centre-Time-Stamp in time-string 
format (refer <dt>) 
<stat>  0  "REC UNREAD"  Received unread messages 
  1  "REC READ"  Received read messages 
  2  "STO UNSENT"  Stored unsent messages 
  3  "STO SENT" Stored sent messages 
<toda>  GSM 04.11 TP-Destination-Address Type-of-Address octet 
in integer format (when first character of <da> is + 
(IRA 43) default is 145, otherwise default is 129) 
<tooa>  GSM 04.11 TP-Originating-Address Type-of-Address octet 










