TAB08 8" Tablet PC USER MANUAL
Contents 1.Attentions 2.Accessory 3.Hardware specification 4.Product description 5.Power on/off 6.Window 7.Button 8.System setting * WIFI Interface * Voice * Time and date setting * Screen and standby 9.Install & Delete Operation application program 10. Touch Calibration 11. Music 12. Audio 13. Photo 14. Network 15. Recording 16. Camera 17. E-market 18. Email client 19. Wall paper 20. External equipment *USB connection *OTG application *Keyboard & Mouse 21. Firmware upgrade 22.
Attention ﹡This is a high precision electronic product, please do not disassemble. ﹡Avoid intensive beating or collision to the product. ﹡Avoid using this product in the following condition: high and low temperature, damp, dust, strong magnetic and long-term exposed to sun. ﹡Please use a wet cotton to wipe the product shell gently. No use of chemical cleaning solution. Avoid dripping or splashing water to the product and should be placed far away from liquid.
Hardware MID hardware parameters CPU ALLWINNER TECH A10 high performance ARM-A8 processor. Frequency: 1.5GHZ, 560MHzDSP Support OpenGL 2.0 Memory 512MB-1GB DDR3 Flash Support built-in 4GB/8GB/16GB/32GB Support external TF card up to 32GB WIFI IEEE802.11b/g USB USB2.0 OTG Video output HDMI1.3 Audio 3.
Power on /off Power on: press power button and system boots as the following photo The system initiating as the following screen System enters the main menu after finish initiating finished. Power off: Long time pressing power button and dialog box prompt as following. Select “power off” to turn down the product. Standby: The screen turn off when short time pressing the power key to enter standby mode. Press power key again to return general working mode.
Menu label are included in the defaulted desktop. Status bar is to indicate the current information of the system including network status, battery volume, time and so on. Search bar is to search information online with keywords. Main menu located in the right of screen and main menu display complete when it is clicked. Button Volume key: Decrease and increase the volume. Power key: Long time pressing turns on or off the product. Short time pressing enters or stands by the product.
System settings: System setting menu displays as following when the setting menu is clicked. Select the item to set. Time and Date settings Select item “Time and Date” to enter the menu. Select “automatic” to use the network time. Date, time, time zone, 24- hour and date format are available to choose as following. +:Select the icon to increase by 1 -:Select the icon to decrease by 1 Digital inputting directly is available when select the digital and input as follow.
Select “set” to confirm the setting. Screen brightness Select “ display setting” to enter the menu, click “ brightness” and move the process bar to choose the brightness. Screen Timeout Screen Timeout: the delay of automatic screen lock Select “Display settings” to enter the setup menu, move down the direction bar and select “ screen timeout” as follow. Note: This function is invalid when video is playing.
Wi-Fi Connection Click the “setup” icon in the main menu to enter system settings menu. Click “ Wireless & network setting” and then click “Wi-Fi”. Select “ Wi-Fi setting”. Click Wi-Fi to turn on or off the Wi-Fi and click “Network notification” to display the wireless router. Select a wireless network and complete the connection of Wi-Fi according to the notice. Input password for the encrypted network.
The Wi-Fi connection finalizes and displays as follows: *HDMI This product support HDMI Connect MID to a device with HDMI input through a HDMI cable. The system switches to HDMI output in 5 seconds and output audio and video. The content is displayed on connected device after HDMI connection. Install, download and run application *installing:There are many available methods to install Android applications. such as installing by USB and by the third program. Here a third program Appinstaller is introduced.
2. click “Unknown sources”,and then click “OK” display as following: 3. Copy the application to a TF card or the NAND FLASH. 4.
Enter the program installer for the first time, the system confirm NAND FLASH as search directory. 5. When the APK installer program is stored in the TF Card, the system searches catalogue from TF card automatically. 6. Select the application which is needed to be installed.
User can install application on-line by Android market or computer download or web browser download. Uninstall the application program:Applications are able to uninstall by a third-part management tool or application management software in the device. Select “setting”, and then “applications”, next “manage applications”, after that choose relevant application program installed to check the program information or uninstall the applications.
Audio on-line Applications like video player, on-line TV program player, online audio player can be downloaded from Android market and installed in this product. Run the application to watch video or program online and listen to radio online. User can download other third-part network application software including web browse, audio playback, web client, IM. Music playback: Click the icon of "music" in the main menu to enter the interface of music playback.
Video playback Click “Super-HD player” in the main menu, enter the main interface of the “Super-HD player” and all the video and audio files listed as following: Choose the video files and enter video playback interface as follows: "playback" ,"stop", "FF". "FB" are available to control the play back.
Picture Browse: Click the "photo gallery" in the main menu to enter the main interface. All the photos are listed as follows: Choose the picture file to enter the interface.
Choose Wallpaper: you can use the picture as the wallpaper defined. Choose the live wallpaper: you can choose the 3D wallpaper the system offer. Choose the photo gallery: You can regard the picture you choose as a static wallpaper. Press and hold the screen, the prompt box displays as follows: Enter the above dialog and click the "wallpaper" setting. Choose as follows: Choose wallpaper: You can regard picture you use defined as the wallpaper Choose the live wallpaper: You can 3D wallpaper the system offer.
Choose the "Record" button to start and “Stop” when it is finished. Choose "playback" button to play the voice recorded right now and "using the record" button to store the voice.
Select the camera buttons in the right corner to take a photo. E-Market: Click the E-Market in the main menu to enter the interface as follows: Choose "next" to process.
Create a Gmail account when no account exists and the following interface displays: Set up “Google Account” as follows:
Choose "next" to process. Finalize the password and then choose "next" to process.
Just add a Gmail account when it exists.
Please write the security code and choose "next" to enter. Click "search" and input the software you want to install.
Select the wanted software and install it, find the apl.
E-mail Client: Click "e-mail" under main menu to enter the email client. You will be asked to set up the account information for the first use as following: Please make sure that the network connected before use Email. For example Email: whhpwjh@126.com Type the effective mail address: whhpwjh@126.
Please set up the different parameter as each information each email supplier offer as following: Default POP3 server will be "126.com", needed to be change into "pop.126.com" Port is "110" needed to modify "25" the system default is pop.126.com instead of 126.com PORT is 110. Then choose "next", it will enter "check and accept server settings" if it is right, it will appear “outgoing server setting" as follows: Modify SMIP, smtp.126.com instead of 126.
If your set up is correct, it will enter next interface: Choose "next" you can enter account information definition page. Please input your name which you expect to display in the email. Then you press "Done" to enter the email interface. It will upload the email automatically. It will display email list as follows: Choose one column to check email immediately, you can select "reply", "remove", "more reply" etc.
External device: *USB connection To use USB cable to connected MID and PC, the default connector is synchronous mode. You can glide status bar and glide down.it will appear interface as following: "USB connected" to show external storage card (SD card) After loaded, you can see the relevant connection information. *OTG Apply Support external storage device in FAT32 Format: like U disc. To connect MID with the external storage device directly. To use OTG cable to connect MID and external device.
*Keyboard & Mouse: Supports USB mouse and keyboard. Hardware upgrade: During Android updating process, if necessary, please copy the data in advance. How to use the Upgrade tool Upgrade files:97F1-D1-H2-H01-N403.img Upgrade process as below:(for example Windows XP system upgrade) 1: Download and Decompress upgrade tool 2: Download and Decompress upgrade file 3: Under PC Upgrade tool LiveSuit.exe (Please install DRIVE if it indicates “Please install drive program” in the FWDN list ) as follows: 4.
Answer: Yes, you can choose DC 5V adaptor to recharge it. CUSTOMER SUPPORT You can contact the Ricatech customer service when you have a question or a problem with your Ricatech product.You can contact us by telephone and email. Email For customer support by email, please sent a email to support@ricatech.com. Please make sure that you mention the model number and serial number of the product,mention your name & address and describe your question or problem clearly.
TAB08 8" Tablet PC GEBRUIKERSHANDLEIDING
Inhoud 1.Mededelingen 2.Accessoire 3.Hardwarespecificatie 4.Productbeschrijving 5.In-/uitschakelen 6.Venster 7.Knop 8.Systeeminstelling * WI-FI-interface * Spraak * Tijd- en datuminstelling * Scherm en stand-by 10.Bewerking voor installeren & verwijderen van applicatieprogramma 10. Aanraakkalibratie 11. Muziek 12. Audio 13. Foto 14. Netwerk 15. Opnemen 16. Camera 17. E-market 18. E-mailcliënt 19. Achtergrond 20. Externe apparatuur *USB-verbinding *OTG-applicatie *Toetsenbord & muis 21. Firmware-upgrade 22.
Opgelet ﹡Dit is een hoogwaardig elektronisch precisieproduct. Demonteer het niet. ﹡Vermijd intensief slaan op of een botsing met het product. ﹡Vermijd in de volgende omstandigheden het gebruik van dit product: hoge en lage temperaturen, vocht, stof, sterke magnetische velden en langdurige blootstelling aan zonlicht. ﹡Gebruik een nat wattenschijfje om de buitenkant van het product voorzichtig schoon te maken. Gebruik geen chemische reinigingsmiddelen.
Hardware MID-hardwareparameters CPU ALLWINNER TECH A10 high performance ARM-A8 processor. Frequentie: 1,5 GHZ, 560 MHz DSP Ondersteunt OpenGL 2.0 Geheugen 512 MB-1 GB DDR3 Flash Ondersteunt ingebouwde 4 GB/8 GB/16 GB/32 GB Ondersteunt externe TF-kaart tot maximaal 32 GB WI-FI IEEE802.11b/g USB USB 2.0 OTG Video-uitvoer HDMI 1.
In-/uitschakelen Inschakelen: druk op de powerknop en het systeem start op met de volgende foto Het systeem begint met het volgende scherm Het systeem gaat na het voltooien van het opstarten naar het hoofdmenu. Uitschakelen: door lang op de powerknop te drukken verschijnt het volgende dialoogvenster. Selecteer “uitschakelen” om het product te weigeren. Stand-by: Het scherm schakelt uit bij het kort indrukken van de powertoets om naar de stand-bystand te gaan.
Bureaublad De volgende bureaubladweergaven verschijnen, zodra het opstarten van het systeem is beëindigd. Statusbalk, zoekbalk en het label van het hoofdmenu bevinden zich op de standaard ingestelde desktop. Statusbalk is voor het aanduiden van de huidige systeeminformatie wat betreft netwerkstatus, batterijvolume, tijd, enz. Zoekbalk is voor het online zoeken naar informatie met trefwoorden. Hoofdmenu rechts van het scherm en weergave van het hoofdmenu voltooid wanneer er op wordt geklikt.
Systeeminstelling, applicatie uitvoeren en installatie, kalibratie scherm aanraken, audio- en videoweergave, webbrowser en spelletjes zijn beschikbaar in het hoofdmenu. Systeeminstellingen: Het menu systeeminstellingen geeft het volgende weer wanneer op het instellingenmenu wordt geklikt. Selecteer het in te stellen item. Instellingen voor tijd en datum Selecteer het item “Tijd en datum” om naar het menu te gaan. Selecteer “automatisch” om de netwerktijd te gebruiken.
+:Selecteer het pictogram om met 1 te verhogen -:Selecteer het pictogram om met 1 te verlagen Rechtstreeks digitaal invoeren is beschikbaar wanneer digitaal en invoer als volgt worden geselecteerd. Selecteer “instellen” om de instelling te bevestigen. Schermhelderheid Selecteer “weergave-instelling” om naar het menu te gaan, klik op “helderheid” en verplaats de voortgangsbalk om de helderheid te kiezen.
Time-outscherm Time-outscherm: het uitstellen van automatische schermvergrendeling Selecteer “Weergave-instellingen” om naar het set-upmenu te gaan, verplaats de richtingsbalk naar beneden en selecteer “time-outscherm” als volgt. Opmerking: Deze functie is ongeldig wanneer er een video wordt afgespeeld. Wi-Fi-verbinding Klik op het pictogram “set-up” in het hoofdmenu om naar het menu systeeminstellingen te gaan. Klik op “Instelling voor Draadloos & Netwerken” en klik vervolgens op “Wi-Fi”.
Voer het wachtwoord voor het gecodeerde netwerk in. De Wi-Fi-verbinding wordt afgerond en wordt als volgt weergegeven: *HDMI Dit product ondersteunt HDMI Sluit MID aan op een apparaat met HDMI-invoer via een HDMI-kabel. Het systeem schakelt in 5 seconden naar HDMI-uitvoer en voert audio en video uit. De inhoud met betrekking tot het aangesloten apparaat wordt weergegeven na de HDMI-verbinding.
Installeren, downloaden en in werking stellen van applicatie *installeren: Er zijn vele beschikbare methoden voor het installeren van Android-applicaties, zoals het installeren met behulp van USB en met behulp van programma‟s van derden. Hier wordt het programma App-installer geïntroduceerd. 1. Ga naar menu, kies de instelling en selecteer “Applicaties”. 2. Klik op “Onbekende bronnen”, klik vervolgens op “OK” en ziet er als volgt uit: 3. Kopieer de applicatie naar een TF-kaart of de NAND FLASH. 4.
Ga voor de eerste keer naar de installer van het programma en het systeem bevestigt NAND FLAS als zoekdirectory. 5. Wanneer het APK Installerprogramma op de TF-kaart wordt opgeslagen, zoekt het systeem automatisch in de catalogus van de TF-kaart.
6. Selecteer de applicatie die moet worden geïnstalleerd. De gebruiker kan de applicatie online via Android Market installeren of via de computer downloaden of via een webbrowser download. Het installatieprogramma verwijderen: Applicaties kunnen worden verwijderd door een beheerprogramma van derden of software voor applicatiebeheer in het apparaat.
Audio online Applicaties als videospeler, online tv-programmaspeler, online audiospeler kunnen via Android Market worden gedownload en op dit apparaat worden geïnstalleerd. Voer de applicatie uit om video‟s of programma‟s online te bekijken en naar online radio te luisteren. De gebruiker kan andere netwerkapplicatiesoftware inclusief webbrowser, audioweergave, webcliënt en IM downloaden. Muziekweergave: Klik op het pictogram "muziek" in het hoofdmenu om naar de interface voor het muziekweergave te gaan.
Videoweergave Klik op “Super-HD-speler” in het hoofdmenu, ga naar de hoofdinterface van de “Super-HD-speler” en alle video- en audiobestanden worden als volgt vermeld: Kies de videobestanden en ga als volgt naar de interface voor videoweergave: "weergave" ,"stop", "FF". "FB" zijn beschikbaar om het afspelen te regelen.
Foto’s bladeren: Klik op “fotogalerij” in het hoofdmenu om naar de hoofdinterface gaan. Alle foto‟s worden als volgt vermeld: Kies het fotobestand om naar de interface te gaan.
Kies achtergrond: u kunt de foto als de gekozen achtergrond gebruiken. Kies de live achtergrond: u kunt de 3D-achtergrond van het systeem kiezen. Kies de fotogalerij: U kunt de door u gekozen foto als een statische achtergrond selecteren.
Kies de knop "Opnemen" om te starten en “Stop” wanneer het klaar is. Kies de knop "weergave" om de spraakopname direct af te spelen en de knop "de opname gebruiken" om de spraakopname op te slaan.
Selecteer de cameraknoppen in de rechterhoek voor het maken van een foto. E-Market: Klik op E-Market in het hoofdmenu om als volgt naar de interface te gaan: Kies "volgende" om verder te gaan.
Maak een Gmail-account aan wanneer er nog geen account bestaat en de volgende interface toont: Stel “Google-account” als volgt in:
Kies "volgende" om verder te gaan. Maak het wachtwoord af en kies vervolgens "volgende" om verder te gaan.
Voeg enkel een Gmail-account toe wanneer het al bestaat.
Noteer de beveiligingscode en kies "volgende" om in te voeren. Klik op "zoeken" en voer de software in die u wilt installeren.
Selecteer de gewenste software en installeer het en zoek als volgt de appl.
E-mailcliënt: Klik op "e-mail" onder hoofdmenu om naar de e-mailcliënt te gaan. Omwille van het eerste gebruik wordt u gevraagd de accountinformatie als volgt in te stellen: Zorg dat het netwerk is verbonden voordat u e-mail gebruikt. Bijvoorbeeld e-mailadres: whhpwjh@126.com Typ het betreffende e-mailadres is: whhpwjh@126.com Typ uw betreffende wachtwoord in: ******** Kies vervolgens: "volgende".
Stel de verschillende parameters aan de hand van informatie van elke e-mailleverancier als volgt in: Standaard POP3-server wordt "126.com" en moet worden gewijzigd in "pop.126.com" Poort is "110" en moet worden aangepast naar "25". De systeemstandaard is pop.126.com in plaats van 126.com; POORT is 110. Kies vervolgens "volgende" en u gaat naar "controleren en accepteren serverinstellingen” als het goed is en verschijnt “uitgaande serverinstelling" als volgt: Wijzig SMIP; smtp.126.com in plaats van 126.
Als uw set-up juist is, gaat het naar de volgende interface: Kies "volgende" en u kunt naar de pagina met een omschrijving van de accountinformatie. Voer de naam in die u wilt weergeven in de e-mail. Druk vervolgens op "Gereed" om naar de e-mailinterface te gaan. De e-mail wordt automatisch geüpload. De e-maillijst wordt als volgt weergegeven: Kies één kolom om onmiddellijk e-mail te controleren. U kunt "antwoorden", "verwijderen", "meer antwoorden", enz. selecteren.
Extern apparaat: *USB-verbinding Om de USB-kabel te gebruiken die met de MID en PC is verbonden, moet de standaard connector zich in de synchrone stand bevinden. U kunt de statusbalk verschuiven en schuif omlaag. De interface verschijnt als volgt: "USB verbonden" om de externe geheugenkaart te tonen (SD-kaart) Na het laden kunt u de relevante verbindingsinformatie zien. *OTG-applicatie Ondersteunt extern opslagapparaat in FAT32-formaat: zoals U-disc.
Voor gebruik van de OTG-kabel om MID en het externe apparaat te verbinden. *Toetsenbord & muis: Ondersteunt USB-muis en -toetsenbord. Hardware-upgrade: Kopieer tijdens het Android updateproces van tevoren de gegevens, indien nodig. Hoe gebruikt u het hulpprogramma voor upgraden Upgradebestanden: 97F1-D1-H2-H01-N403.
Antwoord: U kunt het downloaden van Android Market of online installeren. 4: Versie besturingssysteem? Antwoord: Er wordt gebruik gemaakt van Android 2.3, ingebouwde zeer snelle 3D. Het volledige applicatieprogramma dat op de markt verkrijgbaar is, wordt ondersteund. 5:Vindt het opladen plaats met behulp van USB? Antwoord: Ja, u kunt voor de DC 5V-adapter kiezen om op te laden.
Tablette PC TAB08 8" MODE D'EMPLOI
Sommaire 1.Précautions 2.Accessoire 3.Spécifications matérielles 4.Description du produit 5.Marche/arrêt 6.Fenêtre 7.Bouton 8.Paramètres système * Interface Wifi * Voix * Réglage date et heure * Écran et veille 11.Programme d‟installation et de suppression des applications 10. Calibrage tactile 11. Musique 12. Audio 13. Photo 14. Réseau 15. Enregistrement 16. Appareil photo 17. E-market 18. Client de messagerie électronique 19. Papier-peint 20.
Attention ﹡Il s‟agit d‟un produit électronique de haute précision, ne le démontez pas. ﹡Évitez de soumettre le produit à des chocs importants ou à des collisions. ﹡Évitez d‟utiliser le produit dans l‟une de ces conditions : températures chaudes ou froides, humidité, poussière, champ électromagnétique important ou exposition prolongée au soleil. ﹡Utilisez un coton mouillé pour nettoyer doucement la coque du produit. N‟utilisez aucun produit de nettoyage chimique.
Matériel Paramètres matériels MID Processeur Processeur ARM-A8 ALLWINNER TECH A10 haute performance. Fréquence : 1,5 GHZ, 560 MHz DSP Supporte OpenGL 2.0 Mémoire DDR3 512 Mo à 1 Go Flash Supporte 4 Go, 8 Go, 16 Go, 32 Go intégré Supporte les cartes mémoire externes jusqu‟à 32 Go WIFI IEEE802.11b/g USB USB2.0 OTG Sortie vidéo HDMI1.3 Audio Prise écouteurs de 3,5 mm Haut-parleurs stéréo haute qualité Micro intégré.
Mise en marche/arrêt Mise en marche : Appuyez sur le bouton Marche ; le système démarre de la façon indiquée par la photo Le système s‟initialise de la façon indiquée sur l‟écran suivant Le système entre dans le menu principal après la fin de l‟initialisation. Arrêt : Appui long sur le bouton Marche ; la boîte de dialogue suivante apparaît. Sélectionnez « arrêt » pour éteindre l‟appareil. Veille : L'écran s'éteint après un moment en appuyant sur la touche d'alimentation pour passer en mode veille.
général. Bureau Le bureau suivant apparaît lorsque le phase de démarrage système se termine. Une barre d‟état, une barre de recherche et un label de menu principal sont inclus dans le bureau par défaut. La barre d‟état indique les informations actuelles du système, notamment l‟état du réseau, le taux de charge restant, l‟heure, etc. La barre de recherche sert à chercher des informations en ligne à l‟aide du clavier.
Les réglages système, l‟exécution et l‟installation d‟applications, le calibrage de l‟écran tactile, la lecture de fichiers audio et vidéo, le navigateur internet, des jeux sont disponibles depuis le menu principal. Paramètres système : Le menu des paramètres système s‟affiche de la façon suivante lorsque vous cliquez sur le menu de réglages. Sélectionnez l‟élément à régler. Réglages heure et date Sélectionnez l‟élément « Heure et date » pour entrer dans le menu.
+ : sélectionnez cette icône pour incrémenter de 1 - : sélectionnez cette icône pour diminuer de 1 La saisie digitale directe est disponible lorsque vous sélectionnez le digital et la saisie de la façon suivante. Sélectionnez « régler » pour confirmer le réglage. Luminosité de l’écran Sélectionnez « réglage de l‟affichage » pour entrer dans le menu, cliquez sur « luminosité » et déplacez le curseur en barre pour régler la luminosité.
Délai de verrouillage de l’affichage Délai de verrouillage de l‟affichage : correspond à la durée qui s‟écoule avant le verrouillage automatique de l‟écran Sélectionnez « Réglages d‟affichage » pour entrer dans le menu d‟installation, déplacez la barre de direction vers le bas et sélectionnez « Délai écran » de la façon suivante. Remarque : Cette fonction n‟est pas valide lors de la lecture d‟un fichier vidéo.
Saisissez le mot de passe pour un réseau encrypté. La connexion Wifi se finalise et s‟affiche de la façon suivante : *HDMI Ce produit est compatible HDMI Connectez le MID à un produit équipé d‟une entrée HDMI, par l‟intermédiaire d‟un câble HDMI. Le système passe à la sortie HDMI dans les 5 secondes et sort l‟audio et la vidéo. Le contenu s‟affiche sur le système connecté après la connexion HDMI.
Installer, télécharger et exécuter une application *installation:Il existe de nombreuses méthodes pour installer des applications Android, comme l'installation par USB et par un programme tiers. Ici, nous introduisons Appinstaller, un programme tiers d‟installation d‟applis. 1. Entrez dans le menu, choisissez Réglages et sélectionnez « Applications ». 2. Cliquez sur « Sources inconnues », puis cliquez sur « OK » comme suit : 3. Copiez l‟application sur une carte mémoire ou sur la NAND FLASH. 4.
Entrez dans l‟installateur de programmes pour la première fois, le système confirme NAND FLASH en tant que répertoire de recherche. 5. Si le programme d‟installation APK est stocké sur la carte mémoire, le système recherche automatiquement dans le catalogue de la carte mémoire.
6. Sélectionnez l‟application à installer. L‟utilisateur peut installer des applications en ligne via l‟Android Market ou à travers un téléchargement par ordinateur ou à travers un téléchargement via le navigateur internet. Pour désinstaller l‟application : Les applications peuvent être désinstallées par un outil de gestion tiers ou par le logiciel de gestion d‟application intégré à l‟appareil. Sélectionnez « réglage », puis « applications », puis « gérer les applications ».
Audio en ligne Des applications comme un lecteur vidéo, un lecteur de programmes de télévision en ligne, un lecteur audio en ligne peuvent être téléchargées depuis l‟Android Market et être installées dans ce produit. Exécutez l‟application pour regarder une vidéo ou un programme en ligne et écouter la radio en ligne.
Lecture vidéo Cliquez sur « Lecteur Super-HD » dans le menu principal, entrez dans l‟interface principale du « Lecteur Super-HD ». Tous les fichiers vidéo et audio sont alors listés de la façon suivante : Choisissez les fichiers vidéo et entrez dans l‟interface de lecture vidéo de la façon suivante : « lecture », « arrêt », « FF ». Les « FB » sont disponibles pour le contrôle de la lecture.
Navigation dans les images : Cliquez sur la « galerie photo » dans le menu principal pour entrer dans l‟interface principale. Toutes les photos sont listées de la façon suivante : Choisissez le fichier d‟image pour entrer dans l‟interface.
Choisissez le papier-peint : vous pouvez choisir l‟image comme papier-peint défini. Choisissez un papier-peint animé : vous pouvez choisir le papier-peint en 3D que le système propose. Choisissez la galerie de photos : Vous pouvez définir l‟image de votre choix comme papier-peint statique. Appuyez sur l‟écran et maintenez, la boîte de dialogue suivante s‟affiche : Dans la boîte de dialogue ci-dessus, cliquez sur le réglage « papier-peint ».
Enregistrement vocal : Cliquez sur « Enregistrer » dans le menu principal pour entrer dans l'interface comme suit: Choisissez le bouton « Enregistrer » pour démarrer et « Stop » quand vous avez fini. Choisissez « lecture » pour jouer la voix enregistrée dès maintenant et « utiliser l'enregistrement » pour stocker la voix.
Sélectionnez les boutons de l‟appareil photo dans le coin à droite pour prendre une photo. E-market : Cliquez sur E-market dans le menu principal pour entrer comme suit dans l'interface : Choisissez « suivant » pour continuer.
Si aucun compte n‟existe, créez un compte Gmail ; l‟interface suivante s‟affiche : Initialisez le « Compte Google » comme suit :
Choisissez « suivant » pour continuer. Finalisez le mot de passe, puis choisissez « suivant » pour poursuivre.
Si vous en possédez un, ajoutez simplement un compte Gmail.
Entrez le code de sécurité et choisissez « suivant » pour entrer. Cliquez sur « recherche » puis saisissez le logiciel à installer.
Sélectionnez le logiciel souhaité et installez-le, trouvez comme suit l‟apl.
Client de messagerie électronique : Cliquez sur « e-mail » sous le menu principal pour entrer le client de messagerie électronique. Il vous sera demandé d‟établir les informations du compte pour la première utilisation de la manière suivante : Assurez-vous que le réseau connecté au préalable utilise/autorise les e-mails. Exemple d‟e-mail : whhpwjh@126.com Saisissez l‟adresse e-mail réelle : whhpwjh@126.
Mettez en place le différents paramètres comme chaque information de chaque fournisseur offre e-mail comme suit: Le serveur POP3 par défaut sera « 126.com » et devra être changé en « pop.126.com » Le port est « 110 » nécessaire de modifier « 25 » la valeur par défaut du système est pop.126.com à la place de 126.com le PORT est 110. Ensuite, choisissez « Suivant », ceci permet d‟entrer dans « vérifier et accepter les paramètres du serveur ».
Si l‟installation s‟est produite correctement, elle va entrer dans l‟interface suivante : Choisissez « suivant » - vous pouvez entrer dans la page de définition des informations de compte. Entrez le nom que vous souhaitez voir apparaître dans l‟e-mail. Puis appuyez sur « Fait » pour entrer l‟interface d‟e-mail. L‟e-mail sera téléchargé automatiquement vers le serveur.
Équipement externe : *Connexion USB Pour utiliser le câble USB pour connecter le MID au PC, le connecteur par défaut est le mode synchrone. Vous pouvez faire glisser la barre d‟état, faites-la glisser vers le bas. L‟interface apparaît comme suit : « USB connecté » pour montrer la carte de stockage externe (carte SD) Après le chargement, vous pouvez voir les informations de connexions associées. *Application OTG Supporte les dispositifs de stockage externes au format FAT32 comme : l‟U-disc.
Pour utiliser le câble OTG pour connecter le MID au périphérique externe. * Clavier & souris : Supporte une souris USB et un clavier. Mise à jour du matériel : Au cours de la mise à jour d‟Android, copiez les données à l'avance si nécessaire. Comment utiliser l’outil de mise à jour Mettez à jour les fichiers:97F1-D1-H2-H01-N403.
4:Version du système d‟exploitation? Réponse : Il utilise Android 2.3, en 3D haute vitesse. Il supporte pleinement toutes les applications Android disponibles dans le market. 5:Peut-on le recharger par USB? Réponse : Oui, vous pouvez choisir l‟adaptateur secteur 5V pour le recharger. SERVICE CLIENT Vous pouvez contacter le service clients Ricatech si vous avez une question ou un problème avec votre produit Ricatech.