R1500P(EN-TACONY)-9.32004.9.
R1500P(EN-TACONY)-9.32004.9.39:55AM 3 IMPORTANT SAFETY INSTRUCTIONS Read All Instructions Carefully Before Using This Appliance When using an electrical appliance, basic precautions should always be followed, including the following : WARNING - To reduce the risk of fire, electric shock, or injury : 11. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 12. Do not use outdoors or on wet surfaces. 13. Do not allow to be used as a toy.
R1500P(EN-TACONY)-9.32004.9.39:55AM 4 CONTENTS DESCRIPTION AND USING ............................................. 4~5 HOW TO POWER NOZZLE .............................................. 6~9 SAFETY PRECAUTIONS .................................................... 10 REPLACING BAGS & FILTERS .......................................... 11 TROUBLESHOOTING GUIDE ............................................
R1500P(EN-TACONY)-9.32004.9.39:55AM 5 DESCRIPTION AND USING FULL BAG INDICATOR HOSE ADAPTER How to check the FULL BAG INDICATOR: • When separating the hose from the body, pull the hose adapter while pressing the buttons. • If the red indicator appears: - Empty the vacuum bag. - If the vacuum bag isn’t full and the full bag indicator is red, check the hose for a clog. • When cleaning with a tool (dusting brush,upholstery nozzle,crevice tool,floor tool), the red indicator may appear.
R1500P(EN-TACONY)-9.32004.9.39:55AM ADAPTER 6 CORD REWIND ON/OFF SWITCH hose from the body, pull the essing the buttons. Adapter button POWER CONTROL MAX Power control is on the canister body not the handle STOP CLEANING TOOLS stery Nozzle Crevice Tool STORAGE • Insert the brush holder on the neck of the wand into the groove.
R1500P(EN-TACONY)-9.32004.9.39:55AM 7 HOW TO USE POWER NOZZLE OPERATION 1. Turning on the Power Nozzle The power nozzle can only be turned on if the canister is also turned on (canister on / off switch is located on the main body). The power nozzle on / off switch is located on the handle. Simply press the switch forward to engage the power nozzle. 4. Carpet Height Adjustment Your power nozzle has six different settings to clean a variety of carpet types and floor surfaces.
R1500P(EN-TACONY)-9.32004.9.39:55AM 8 OPERATION 5. Warning Light Your power nozzle comes equipped with a circuit breaker safety system that protects it from a jammed power nozzle situation. Common items that cause jammed brushrolls include socks, excessive threads, corners of area rugs, etc. The warning indicator light on top of the unit (see diagram 8) will change from green to red should this condition occur. Warning Light Diagram 8 If the circuit breaker trips: a.
R1500P(EN-TACONY)-9.32004.9.39:55AM 9 MAINTENANCE AND CARE 2. Replacing the Power Nozzle Belt IMPORTANT: Before performing any maintenance work on the power nozzle, always unplug the vacuum cleaner and disconnect the wand. 3. Replacing the Bulb IMPORTANT: Before performing any maintenance work on the power brush, always unplug the vacuum cleaner and disconnect the wand. To replace the power nozzle belt, you must first remove the brushroll (see "Removing the Brushroll"). Locate and discard broken belt.
R1500P(EN-TACONY)-9.32004.9.
R1500P(EN-TACONY)-9.32004.9.39:55AM 11 SAFETY PRECAUTIONS This vacuum cleaner should be used for normal, dry household dust and dirt. The manufacturer cannot be held responsible for any damage caused by use or operation of the vacuum contrary to these instructions. If the vacuum is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for any possible damage.
R1500P(EN-TACONY)-9.32004.9.39:55AM 12 REPLACING VACUUM BAG & FILTERS REPLACING THE VACUUM BAG Vacuum bag Holder Full Bag Indicator Dust Cover • Turn canister off, remove • Pull the shutter of the vacuum bag. hose and open the dust cover. • Hold the cover while removing the vacuum bag from the vacuum bag holder. • Insert the new bag. NOTE: We recommend the vacuum bag is changed when indicator is RED or suction power is weak.
R1500P(EN-TACONY)-9.32004.9.39:55AM 13 TROUBLESHOOTING GUIDE ■ Please check each item below if you have trouble with your vacuum. Before checking, ensure that the vacuum is unplugged from the power supply. Problem • Suction power is weak. Check Point Note • Vacuum bag • If vacuum bag is full, replace it. • If clogged or blocked, remove the object. • Wand or hose • The vacuum does not work. • Is the hose adapter inserted into the suction opening of the vacuum completely? • Insert it completely.
R1500P(EN-TACONY)-9.32004.9.