R10S, R10D, R10P & R10SAND O wner’s Ma nua l
.
Contents Getting Started Important Safety Instructions Polarization Instructions State of California Proposition 65 Warnings Description of the Vacuum Assembling the Vacuum 2 3 3 4 5 Operation R eclining the Handle On/Off Switch Edge Cleaning Automatic Carpet Height Adjustment Bare Floor Cleaning 6 6 6 6 6 Maintenance and Care ower Cord Care P Vacuuming Under Furniture Replacing the Vacuum Bag Removing/Reinstalling the Bottom Plate Replacing the Agitator
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE T he manufacturer cannot accept responsibility for damage IMPORTANT: caused when the appliance is not used according to the instructions, or for uses other than those for which it was intended. To reduce the risk of fire, electric shock or injury: • Do not handle plug or appliance with wet hands.
Polarization instructions Power Cord, 2-Wire Polarized Cord To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet.
Description of the Vacuum 1 2 11 10 3 5 4 7 6 1 Ergonomic Handle 2 On/Off Power Switch 3 Bag Compartment 4 Vacuum Nozzle 5 Headlight 6 Furniture Guard 7 Brushroll Jam Indicator (models R10P and R10SAND only) 8 Circuit Breaker Reset Button (models R10S and R10D only) 9 Handle Release Pedal 10 Quick Release Cord Hook 11 Upper Cord Hook 8 4 9
Assembling the vacuum 1 2 3 5 4 8 7 6 SHEET 1 OF 1 PART 6 DESCRIPTION O B C D D 8 PART NUMBER SHEET 1 OF 1 C 5 NOTE: Do not plug in the vacuum until it is completely assembled. 7 B • Thread the cord through the lower and upper cord guides on the back of the vacuum bag (Fig. 1). 4 The vacuum cleaner and the handle are packed separately and require assembly. A 3 MATERIAL FINISH DRAWN DATE DATE ISSUED SCALE DO NOT SCALE 1.
Operation 3 This vacuum is intended for household use only. Reclining the Handle • Press the handle release pedal located on the 1 back of the vacuum with your foot to recline the handle (Fig. 1). 2 2 1 2 D 3 4 5 4 5 Fig. 1 1 On/Off Switch 3 D • The power switch located on the vacuum handle, is a three-way switch (Fig. 2). The middle position is the “Off” setting, the rear position is the “On” setting and the forward position is for “Maximum Power” (Fig. 3).
8 PART NUMBER SHEET 1 OF 1 DESCRIPTION OF CHANGE B REV C D MAINTENANCE AND CARE 7 Power Cord Care 6 • If the cord or plug has any apparent damage, refrain from using the vacuum. Please visit an Authorized Riccar Retailer for a new cord or plug. • When the vacuum is in use, hold the cord to keep from running over it. 5 • Avoid obstructions and do not pull the cord around sharp edges or corners.
MAINTENANCE AND CARE Replacing the Vacuum Bag NOTE: Unplug the vacuum cleaner from the electrical outlet before changing the bag. • Unzip the bag compartment. • Remove the used vacuum bag by pulling the green bag collar tab away from the vacuum (Fig. 1). Slide the used bag out of the bag holder which automatically seals the bag opening (Fig. 2). Discard the used bag. Fig. 1 • To install a new bag, slide the bottom of the green bag collar into the bag holder until it “snaps” into place (Fig. 3).
MAINTENANCE AND CARE Removing and Reinstalling the Bottom Plate WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. To Remove the Bottom Plate: • Press the handle release pedal to place the vacuum cleaner in the flat position. • Turn the vacuum cleaner over, exposing the bottom plate. • Turn the two screws a quarter turn to release the bottom plate (Fig. 1). Remove the bottom plate.
MAIntenAnCe AnD CARe Replacing the Agitator Belt (Models R10S and R10D only) WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. NOTE: To ensure maximum cleaning efficiency, the belt should be checked regularly to be sure it is in good condition. Check to see if the belt is stretched, cracked, or if excessive slipping is occurring. Replace if needed. • Remove the bottom plate (see page 9).
MAIntenAnCe AnD CARe Brushroll Jam Indicator (Models R10P and R10SAND only) If an object, such as a throw rug or article of clothing is ever picked up into your vacuum, the vacuum will sense this “jammed brushroll” condition and turn off the brushroll. When this happens, the Brushroll Jam Indicator light on the top of the nozzle will flash in red. • Turn off the vacuum and remove the cause of the jam. Turn the vacuum back on.
MAINTENANCE AND CARE Resetting the Circuit Breaker (Models R10S and R10D only) WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. Your vacuum features a circuit breaker to protect the machine against damage due to a surge in the electrical current. Electrical surging can be a result of, though not limited to, a jammed motor fan.
Problem Solving Guide Troubleshooting WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug Before Servicing or Cleaning. CAUTION! To Reduce the Risk of Electric Shock, Do Not Handle Plug or Appliance with Wet Hands. PROBLEM POSSIBLE REASON POSSIBLE SOLUTION Vacuum won’t turn on • Power cord not firmly plugged in • Blown fuse or tripped breaker • Plug cord in firmly • Needs service • Check house fuse or breaker. Replace fuse/ reset breaker.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Riccar vacuum and applies exclusively to the original purchaser. How Long Coverage Lasts: Warranty coverage for R10S and R10D lasts four years. R10P and R10SAND lasts 5 years. Household models used commercially are only warranted for 90 days. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse or improper m aintenance.
Owner’s Warranty Information keep this for your records… Date of purchase Serial number Model number Purchased from: Store name Address City, State, Zip Telephone 15
NOTES 16
17
www.Riccar.com ©2013 Tacony Corporation B503-7000 10.