CARPET EXTRACTOR model RCE O wner’s Ma nua l 1
Contents IMPORTANT SAFETY INSTRUCTIONS Grounding instructions Description of the extractor Before using your extractor for the first time 2 3 4 5 Operation While operating the machine Cleaning with accessory tools Draining the recovery tank Draining the solution tank 6 7 8 8 Maintenance and Care Filter maintenance Extractor maintenance 8 9 Problem Solving Guide Troubleshooting Helpful hints 10 11 Owner’s Information 12 Warranty 13
IMPORTANT SAFETY INSTRUCTIONS This machine is intended for household use. It is designed to clean carpet and upholstery in an indoor environment and is not constructed for any other use. Use only recommended cleaning solutions and accessory tools. All operators must read, understand and practice the following safety precautions.
Description of the Extractor Before Using Your Extractor for the First Time 5 • The machine is shipped fully assembled and is ready for use. • Adjust handle from transport position. To adjust, while standing behind the machine 6 4 lift handle to desirable operating height. Turn right knob forward while turning left knob backward to tighten handle in operating 7 13 position (fig 1). 13 13 • Hinge open cover and remove recovery tank from machine.
Operation Attachment Cleaning For Safety: Do not operate machine unless • Connect accessory hose to hose coupler operator manual is read and understood. (fig 1) and hose port (fig 2) located at front of machine. • Vacuum carpet thoroughly and remove other debris. • Connect accessory tool to coupler and hose cuff on the other end of the hose (fig 3). • Turn main power switch on. • Turn main power switch on.
Maintenance Maintenance Draining Tanks For Safety: When servicing machine, unplug For Safety: When servicing machine, unplug cord from wall outlet. cord from wall outlet. Regular Maintenance Tips Draining recovery tank • Empty and rinse out recovery tank • Turn machine off and unplug power cord. thoroughly. • Hinge open cover, lift recovery tank out • Remove float shut-off screen from hinged and empty. Figure 1 cover above the recovery tank cover and clean (fig 1).
Problem Solving Guide Problem Solving Guide Troubleshooting Please check each item below if you have trouble with the carpet extractor. Unplug the carpet extractor from the power supply before servicing. Problem Cause Machine does not operate Extractor not plugged in Solution Main on/off switch not turned to the on position. Turn machine on. Building circuit breaker tripped. Unplug machine from wall outlet. Check and reset circuit breaker in building. Plug in machine and turn on to operate.
Owner’s Information Warranty (keep this for your records) The model and serial number of this product may be found on the back of the unit. You should note the model and serial number of your carpet extractor in the spaces provided below, and retain this book as a permanent record of your purchase.
Notes Notes 14 15
www.riccar.
