Service manual

Installation 15

2.10 Optional AC/DC Power Supply Adapter Box Kit

The following are instructions to install the AC/DC Power Supply Adapter Box on a portable animal scale.

Figure 2-10. AC/DC Power Supply Adapter Box Kit

2.10.1 Mounting to Scale

Figure 2-11. Mounting Power Box Assembly to Frame

The mounting bracket can be positioned anywhere along the frame within the limits of the conduit.

1. Place mounting bracket assembly on the outer beam of the bottom frame on the scale in desired location.

Angle bracket should extend past the front of the beam and backplate extensions should be flush with back

of beam.

2. Tighten bolts to secure to frame. Ensure they are tight enough to resist movement when scale is in use.

When ordering a complete package, the enclosure box will be assembled to the mounting bracket.

Skip to Step 4.

3. Mount the enclosure box to the mounting bracket using the bolts and washer supplied.

Backplate

Extensions

Base Frame

of Scale

Angle Bracket

Bolts for securing

bracket to frame

Note