Troubleshooting guide

RS-232 Communications 19
3. Double click on the Rswin.exe file and the following screen appears.
Figure 7-1. Rswin Main Screen
4. Click on FILES and in the dropdown menu, select LOAD CONFIGURATION. At this time double click on the
file, Inbar.ini.
5. Click on STRINGS and the following screen appears.
Figure 7-2. Strings to be Used in the RS-232 Transmission
This screen is showing that the function keys are already pre-programmed with command sets. For
example, pressing the
F1 key is the same as sending <ESC>R<ESC>E.
6. Click on DISPLAY and in the drop down menu, select either HEX or ASCII.
Click on FILES
and in dropdown
menu, select
LOAD
CONFIGURATION
as noted in Step 4