Manual

2 Versa-portion RLP-S/SM Operation Manual
2.0 Operation
2.1 On/Off
1.Press the POWER key. The display will blink 8.8.8.8.8.8. and show 0.000 when ready
to weigh.
2.2 Tare
Tare values can be used for up to half of scale capacity.
Performing a Tare
1.Place the item to be tared (typically a container) on the platter.
2.Press the TARE key.
3.The display will show 0.000 with the tared item on the platter.
Removing a Stored Tare
1.Remove the tared item from the platter.
2.Press the TARE key.
3.The display will show 0.000.
2.3 Automatic Shut-Off Timer
The Versa-portion RLP-S/SM has a built-in automatic shut-off timer. This timer can be set
to turn the unit off after three minutes of inactivity or 10 minutes of inactivity.
Setting the Timer for Three Minutes
1.If the unit is powered on, press the POWER key until it shuts down.
2.With the unit powered off, press and hold the POWER key for three seconds.
The display will show 3.
3.Release the POWER key. The timer is now set to turn the unit off after three minutes of
inactivity.
Setting the Timer for 10 Minutes
1.If the unit is powered on, press the POWER key until it powers off.
2.With the unit powered off, press and hold the POWER key for six seconds.
The display will show 3 after a period of three seconds. It will show 10 after six
seconds.
3.Once the display shows 10, release the POWER key. The timer is now set to turn the
unit off after 10 minutes of inactivity.
Disabling the Timer
1.If the unit is powered on, press the POWER key until it shuts down.
2.With the unit powered off, press and hold the POWER key for nine seconds.
The display will show 3 after a period of three seconds and 6 after six seconds. It will
show
999 after nine seconds.
3.Once the display shows 999, release the POWER key. The timer is now disabled.
2.4 Display Brightness
The Versa-portion RLP-S/SM display brightness can be set to one of three levels.
Changing the brightness setting
1.Hold the ZERO key and press Ta re three times.
2.Press the ZERO key to increase the dimmer level and the Power button to decrease the
dimmer level.
3.The display will show 1, 2, 3, or 4 depending on which dimmer level is being
displayed.
4.Press the TARE key to save the setting and return to weigh mode.