Manual

Operation 3
2.5 Default Primary Unit
The Units button cycles through g, lb, and oz. (Versa-portion RPL-SM is only available in
kg)
Setting the Default Primary Unit
1.Hold the
ZERO key and press the UNITS key three times.
2.Press the
POWER key to cycle through available units.
3.When the desired default unit is displayed, press the TARE key to save the setting and
return to weigh mode.
2.6 G, lb and oz Conversion
(Not available in Versa-portion RLP-SM)
G, lb and oz conversion is available only when SPEC08=011 (see Section 3.4).
1.Switch between units by pressing the
UNITS key.
Note
(G) uppercase is the abbreviation for gross.
(g) lowercase is the correct abbreviation for grams.