User`s manual

- 11 -
Slave
03-04：Mail Ser 4
LIST： Mail Group
PWR C# KVM NAME SVS
● 01 Mail Ser 1 Θ
● 02 Mail Ser 2 Θ
● 03 Mail Ser 3 ♁
● 04 Mail Ser 4 ♁
) *↑↓： Move Space： Edit Esc： Exit
F1： Smart View Enter： Switching
F4： Auto Scan F9： System Setting
F5： Clear Name List
This field provides the information of the currently connected PC. As shown in the figure above,
C#03 refers to the Port Number of the Master; C#04 refers the Port Number of the Slave; and
Mail Ser 4 is the name of this PC defined by Users. If a PC connects to the Master, then the
number consists of the first two digits. If a User has not given a name for the PC, the name field
will be blank.
This field shows the list of the Master KVM or a certain set of Slave KVM currently display on
the OSD. We suggest you to give a name to the Slave KVM, otherwise the display after LIST:
will be blank.
This field show the list of connections to the KVM, and the fields are described below：
1.PWR：
It shows the status of power supply and indicates a normal power supply for the equipment
(PC or KVM) connected to the CPU port.
2.C# ：
It shows the channel number; the CBM-108 will display 01~08 and the CBM-116 will display
01~08; 09~16 (Since the screen cannot display all at a time, therefore you can use Pg Up/ Pg
Dn to switch the pages).
3.KVM：
It shows the KVM model. If there is a number in this field, it shows that a set of KVM
connects to this port. The number 08 indicates Port 8 and the number 16 indicates Port 16 and
so on.
Note：If the connected KVM is not on, there will have no number in this field.
4.NAME：