User`s manual

- 15 -
EDID & DDC：
Majority of computer monitors support the Extended Display Identification Data (EDID) and
allows data access by Display Data Channel (DDC). The KVM also supports these two
specifications, but the KVM only reads the EDID of the Monitor when the KVM is on. If it is
necessary to change monitors during an operation, please use the Console Reconfirmed function
to read the EDID again.
Firmware：
This product provides firmware update function. You can contact your distributor for
downloading application programs and attests software. Use the F/W Update Cable to update.
Please turn off all PC before carrying out the update, and do not disconnect the power during the
update process.
Procedure：
1. Download and install the application program KVMISP.msi. (Note：This program has to be
run only on Win98SE, ME, XP or 2000).
2. Connect the F/W Update Cable, and the PC end is RS-232 port (COM-X) while the KVM
end is the keyboard port of the Console port.
3. Power on the KVM and run KVM-ISP.exe. Select the COM port.
4. Select the Download function and specify to update the KVM-XXXX.KVM file.
5. After upgrade (which takes about 1.5 minutes), power off the KVM. Unplug the F/W Update
Cable and plug the Keyboard to the keyboard port of the Console port. Power on again.
6. You can use the system setting “F1”- Information in the OSD to examine whether or not the
F/W version is the latest version.