User`s manual

- 3 -
FEATURES
‧Stand-alone machine controls up to 8/16 sets of PC
‧Cascade controls 256 sets of PC
‧Supports hot key, mouse clicking and push button on front panel switch under OSD
‧Fully supports Logitech/Microsoft/IBM PS/2 /USB/mouse and compatible PS/2 and USB
/mouse/trackball.
‧Monitor PC status by Auto Scan function
‧Embedded mouse and keyboard simulators assure the proper boot of a PC.
‧Supports high resolution of 1920×1440, 60Hz and independently control EDID & DDC2 of
each PC.
‧Each Port on the panel of the KVM has independent push button and LED lamp for easy
switch and identification.
‧Compability with the height of the 1U chassis specification and installable with a hanging
stand into a 19” chassis system
‧No additional software or hardware required.
‧Supports hot plug; install a new PC or KVM without turning off the original system
.
EQUIPMENT REQUIREMENTS
Computer System
• Support VGA, SVGA, XGA, SXGA or Multisync Video Card.
• PS/2 (mini-DIN 6Pin) Mouse port.
• PS/2 (mini-DIN 6Pin) or USB (USB Type A) with PS2-to-USB Adaptor Keyboard port.
Console
• VGA, SVGA or Multisync CRT/LCD Monitor or projector.
• PS/2 Mouse, Keyboard
• USB Mouse, Keyboard.
Cable
• 3-in-1 KVM Cable is for PS2 Computer or Server; if connect to USB PC or Server,
Please use PS2 to USB Adapter.
Connect to CPU port of KVM Connect to Console port of PC or Slave KVM