User`s manual

- 5 -
CONFIGURATION
8 Port KVM
16 Port KVM
1. Port Selection Switches
Press the push button directly switches the corresponding PC.
• In the cascade structure, if the port is connected to KVM but not PC, then the push button
will not respond.
• Press Push Buttons 1 and 2 simultaneously enter the OSD Control Mode.
• Press Push Buttons 7 and 8 simultaneously (8 port kvm), Push Button 15 and 16 (16 port kvm)
to start “Console-Reconfirmed”, and the keyboard and mouse will reconnected, and the
EDID in the screen will be reread.
2. Port LED
These Port LEDs are built in the Port Selection Switch
Online：Green light indicates that the PC or KVM connected to the corresponding port is on
and operating.
Selected：Red light indicates the PC is being controlled.
‧Besides the special mode, the whole system structure has one red light at port 1 (indicating
that the PC is on and connected)