Manualshelf

User`s manual

ManualsBrandsRichard Gray Power Company ManualsData Input DevicesMX81-IP
12345678910
- 7 -
INSTALLATION
Stand-alone
1. Confirm that KVM is on the power-off status, connect the power adaptor to the KVM, but
don’t plug the adaptor to the AC power.
2. Connect monitor (HD-15), keyboard (mini Din6, PS/2 or USB) and mouse (mini-DIN6,
PS/2 or USB) to console Port.
3. Check if each PC is at the power-off status and connect KVM to PC by 3-in-1 cable (with
PS/2-to-USB Adaptor)
Connect one end to the Computer monitor, keyboard and mouse connection port and the
other end to the KVM.
4. Power-On the KVM
5. Power-On the Computer.
Note：
It is not necessary to power off the whole system for installing a new PC or KVM. All you
need is to make sure that the new PC or KVM is OFF during the installation. If the KVM
powers down due to external factors (such as power failure or the power of the KVM is turned
off), we suggest you to reinstall the whole system.
Serial Connection
1. Choose the master KVM and make sure unlink adaptor to DC jack.
2. Install the monitor (HD-15), keyboard (PS/2 or USB) and mouse (PS/2 or USB) at the Master
KVM Console end.
3. Choose the master KVM and make sure unlink adaptor to DC jack.
Install the Master KVM to the 3-in-1 cable (same as the cable for connecting the KVM to the
PC) in the middle of the Slave KVM
4. Choose the master KVM and make sure unlink adaptor to DC jack and then connect the
3-in-1 cable to each PC one by one.
Note：
Install the PCs on the master or the PCs on the Slave first. If the on-line LED (Green) of any
port of a PC is on, then we suggest you to turn off the PC (Turn off the power switch of the
power supply of the PC or unplug the power cable of the PC) or wait until Step 8 to install that
PC.
5. Please link adaptor to DC jack of the slave KVM.
6. Power on the PC.
Note：
It is not necessary to power off the whole system for installing a new PC or KVM.
Make sure that the new PC or KVM is OFF during the installation. If the KVM powers off
due to the external factors (such as power failure or the KVM is turned off), we suggest you to
reinstall the whole system.