User's Manual

BTS-32 BM3251_AUX In_20140729 V1.0

B. About the rechargeable Battery & Charging

1. Regarding the lithium rechargeable battery

 This Bluetooth Speaker has an internal, non–user-replaceable battery.

For best results, the first time you use this Bluetooth Speaker, let it

charge for about 4 ~ 6 hours or until the “Charge LED (11)” Indicator

light from On to off which show you the battery is fully charged.

 For maintain the battery life and performance, if speaker isn’t used

for a while, the battery might need to be recharged. Charge the

battery at least once every month.

2. To recharge the built-in battery:

 Connect the Bluetooth Speaker’s “Micro USB socket (5)” with the

Computer’s USB port through USB cable.

 The “Charge LED (11)” Indicator will turn On in red, the battery is in

charging.

 The “Charge LED (11)” Indicator will turn Off when the rechargeable

battery is fully charged.

 Disconnect the USB cable when it is done.

C. Power ON and Pairing

1. Press and hold the “ (3)” button to turn On the device. A series of

tones will sound, followed by voice announce “It is pairing waiting

for device connecting” from speakers. And the “Bluetooth LED (2)”

indicator is fast blinking in Blue.

2. Then, activate the Bluetooth function in your Bluetooth device (such

as Mobile Phone or Personal Computer); the device will enter to

Bluetooth searching mode automatically, if not, tap the relate

selection to manually enter to searching mode. (refer to your device’s

manual when necessary)

3. Your Bluetooth device should show

“HOMEANDGO” in list, and then

select it for pairing. Waiting for some seconds and you will see

connected message as shown on your mobile device. (For some

Bluetooth devices, you may need to input “0000” as pairing

password)

4. If pairing is successful, voices announce “paired” from speakers, and

the “Bluetooth LED (2)” indicator will slow blinking each 3 seconds

once.

5. Now, you can start to music play from the mobile device by it music

player program.

6. Press and hold the “

(3)” button to turn Off the device when it is

not in use.