User's Manual

Model Number: S3

Bluetooth Speaker

Quick Start Guide

Power on/off

6 Aux-in Hole

2 Mode / Charging LED indicator 7 Mini USB socket

V / Previous Song 8 Micro Hole

+ V+ / Next Song

9 Strap-Hook

5 Pause/Play/Hands-free 10 Foot Cushion

Charging The Bluetooth Speaker

1. Connect the Bluetooth Speaker’s Mini USB socket (7) with the Computer’s USB port

through USB cable.

2. The Charging LED (2) will turn ON in red light; the rechargeable battery is in

charging.

3. The Charging LED (2) red light will turn OFF when the rechargeable battery is fully

charged.

Bluetooth Speaker Pairing / Reconnecting

1. Press and hold the button (1) for 2 - 3 seconds, a tone sound will announce

from speaker and the Mode LED (2) will blinking between blue and red, the device

is turned ON and goes into reconnect / searching mode for pair depend on status;

2. Now, turn ON the Bluetooth function on your device, search for device name

“BLT-10” and select it to pair.

3. If pairing is successful, a tone sound will announce from speaker and the Mode LED

(2) light will switch to slow blink in blue (every 3 seconds once).

4. The Bluetooth Speaker will be reconnecting automatically if your mobile phone has

been paired. (Depend on the mobile phone’s type and configuration, manual

reconnection may require on some devices)

5. Press and hold the

button (1) for 2 - 3 seconds, a tone sound will announce and

Bluetooth speaker turned to OFF when you not use it.

PAGE 1
Model Number: S3 Bluetooth Speaker Quick Start Guide 1 2 3 4 5 Power on/off Mode / Charging LED indicator V / Previous Song + V+ / Next Song Pause/Play/Hands-free 6 Aux-in Hole 7 8 9 10 Mini USB socket Micro Hole Strap-Hook Foot Cushion Charging The Bluetooth Speaker 1. Connect the Bluetooth Speaker’s Mini USB socket (7) with the Computer’s USB port through USB cable. 2. The Charging LED (2) will turn ON in red light; the rechargeable battery is in charging. 3.
PAGE 2
Note: During in searching / pairing mode, the Bluetooth Speaker will power OFF automatically in 5 minutes if no device is connected and idle. Bluetooth Speaker Control Function 1. 2. 3. 4. 5. 6. button (5) to pause music, press it once again to play. In playing music, press Pressing or press and hold the + button (4) to increases the volume level. Pressing or press and hold the button (3) to decreases the volume level. When maximum or minimum volume is reached, a tone sound will be heard.
PAGE 3
Aux-In Function 1. Open your device, and connect with Aux-in cable, the indicator will be always light in blue when it works. Under this status, all buttons can not use, expect the button (1). FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.