Control box HJC9G Ble
1.Remark: Up to 2 motors BLE control available Memory function Color: black 2.
.System configuration diagram 4.
5.Remote control function description Button label 1 2 3 4 5 6 7 8 9 10 function The bed bottom lamp is on/off (constant light). Flashlight on/off (default 15s). Reuse function: â‘ Press and hold the button for 5s, the backlight flashes, enter the memory mode, press ZG/SNORE/TV/M1/M2 within 2s, the buzzer "dididi" will sound, and the current motor position, massager, and light bar can be memorized state.
11 12 13 14 15 16 17 18 current motor position, massager, and light bar status to M1. (Not cleared after power failure) The motor runs to the TV position (with an initial value) with one button. Multiplexing function: long press the flashlight for about 5s, the backlight flashes, press TV within 2s, the buzzer will sound 3 times, and record the current motor position, massager, and light bar status to the TV.
Note: Press any button for more than 50s, the remote control will enter sleep, release it and press it again to resume the function.
Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
