Control box HJC26C Ble
1.Remark: Up to 2 motors BLE control available Memory function Color: black 2.
.System configuration diagram 4.
5.Remote control function description Button label 1 2 3 4 5 6 7 8 9 function ANTISORE (anti-screaming): Tap to run to the leisure position (there is an initial position). The customer cannot modify the location. ZG (Zero Gravity): Tap to run to zero gravity position. (With initial position) Multiplexing function: FLAT+ZG for about 3s, the backlight of the remote control flashes, the buzzer of the control box sounds "dididi", and the current position is memorized as the ZG (zero gravity) position.
Press the button, the leg motor retracts, release it to stop. One-button reset: press the button, the massager is 11 turned off, and the motor retracts to the FLAT position at the same time. (Not reset after power on) Short press the button: If the back massage motor is not activated, it will start the back massage motor and enter the first-level intensity "CONSTANT" mode.
Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
