Control box HJC56 Ble
1. Remark: Up to 4 motors BLE control available Memory function Color: black 2. Dimension:(mm) 3.
4.Remote control button silicone diagram 5.Fixed position size ZG LOUNGE TV SNORE Head（mm） 49 127 149 30 Foot（mm） 125 83 94 0 6.Remote control function description Button label 1 2 3 Function Press the button, the motor will run to the TV position with one button (there is an initial position) Multiplexing function: Press and hold the FLAT button while pressing the TV button, the buzzer sounds, the backlight flashes, and the current motor status is recorded to the TV position.
5 6 7 8 9 10 11 12 with one button (there is an initial position) Alternate function: Press and hold the FLAT button while pressing the ZG button, the buzzer sounds, the backlight flashes, and the current motor status is recorded to the ZG position. (Power-off memory clear) Press the button to extend the back motor, and the back motor extends to the position of maximum stroke to stop. Release the button in the middle to stop the motor.
Multiplexing function: press the button, if the head massage motor is not activated, it will start the head massage motor and enter the "CONSTANT" mode, if the head massage motor is activated, the vibration intensity of 13 the head massage motor will be enhanced, a total of 3 intensities, When the intensity increases to the maximum, press the button to turn off the massager.
Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
