Technical Specifications

Richmond
®
1.5, 2.5, 4 and 6 Mini-Tanks
Deliver Hot Water Efciently
RichmondWaterHeaters.com RICHMOND
®
WATER HEATERS
Richmond Water Heaters • 1115 Northmeadow Parkway, Suite 100, Roswell, Georgia 30076
© Rheem Manufacturing Company • 11 /20 • FORM NO. T-665
PERFORMANCE FEATURES
• Compact design ts virtually anywhere
• Use with hot or cold water feed
• Adjustable temperature control 50°-140°F
• Temperature and pressure relief valve included
• Enameled glass lined tank for extended life
• Floor and wall mountable, wall bracket included
• ETL tested to UL 174 and NSF 372
• All models include standard 120 volt power cord with plug
• Single weld design
• Tank status indicator light – Green: ready mode,
Red: heating mode
LIMITED WARRANTY
• 6-Year limited leaks, 2-year parts
SUGGESTED SPECIFICATION
Water heater shall be a Richmond Mini-Tank model number
__________________________. Unit shall be enameled glass lined
with a single weld design. Water connections and supplied T&P
valve to be located on top of the unit. Unit shall have a status
indicator light with adjustable thermostat. Unit to have a
6-year warranty against leaks.
Certied to UL174.
PRODUCT SPECIFICATIONS
Voltage: 120V
Amperage: 12 A
Heating Capacity: 1440 watts
Phase: Single
Temperature Range: 50°F-140°F
Maximum Operating Pressure: 150 PSI
MODEL
NUMBER
TANK
VOLUME
(GAL)
WEIGHT
(LB) FITTINGS
RECOVERY TIME
BASED ON 60°
TEMP. RISE
6MT1-1 1.5 13.9 1/2" NPT connections at TOP of unit 8 minutes
6MT2-1 2.5 17.6 1/2" NPT connections at TOP of unit 15 minutes
6MT4-1 4.0 21.0 1/2" NPT connections at TOP of unit 24 minutes
6MT6-1 6.0 27.1 3/4" NPT connections at TOP of unit 37 minutes
6MT1-1
6MT2-1
6MT4-1
6MT6-1
A
D
C
B
DIMS.
6MT1-1 6MT2-1 6MT4-1 6MT6-1
KEY inch mm inch mm inch mm inch mm
A 9.63 244.6 10.94 277.9 12.65 321.3 14.19 360.4
B 9.71 246.6 10.91 277.1 12.28 311.9 13.86 352.0
C 15.39 390.9 17.01 432.0 18.24 463.3 20.83 529.1
D 14.40 365.8 16.18 411.0 17.40 442.0 19.99 507.7
*Mounting bracket location on the back of unit
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
POWER CORD WITH
PLUG AVAILABLE
ON ALL MODELS