Copier User Manual

Troubleshooting and routine maintenance
11 - 13
11
Improving the print quality
Examples of poor print quality Recommendation
Faint
Check the machine’s environment. Conditions such as humidity, high
temperatures, and so on may cause this print fault. (See Choosing a location on
page 1-2.)
If the whole page is too light, Toner Save mode may be on. Turn off Toner Save
mode in the Advanced tab of printer driver Properties.
—OR—
If this problem occurs when making copies or printing received faxes, turn off
Toner Save mode in the machine’s menu setting. (See Toner Save on page 2-8.)
Clean the scanner window and the primary corona wire on the drum unit.
(See Cleaning the laser scanner window on page 11-20 and Cleaning the corona
wire on page 11-21.) If the print quality has not improved, install a new drum unit.
(See Replacing the drum unit on page 11-24.)
Install a new toner cartridge. (See Replacing the toner cartridge on page 11-21.)
Grey background
Make sure that you use paper that meets the recommended specifications.
(See About paper on page 1-9.)
Check the machine’s environment - high temperatures and high humidity can
increase the amount of background shading. (See Choosing a location on page
1-2.)
Install a new toner cartridge. (See Replacing the toner cartridge on page 11-21.)
Clean the primary corona wire on the drum unit. (See Cleaning the corona wire on
page 11-21.) If the print quality has not improved, install a new drum unit.
(See Replacing the drum unit on page 11-24.)
Ghost
Make sure you use paper that meets our specifications. Rough-surfaced paper or
thick print media may cause this problem. (See About paper on page 1-9.)
Make sure that you choose the appropriate media type in the printer driver or in
the machine’s Paper Type menu setting. (See Setting the Paper Type in this
User’s Guide.)
Install a new drum unit. (See Replacing the drum unit on page 11-24.)
Toner specks
Make sure that you use paper that meets our specifications. Rough-surfaced
paper may cause the problem. (See About paper on page 1-9.)
Clean the primary corona wire and the drum unit. (See Cleaning the corona wire
on page 11-21 and Cleaning the drum unit on page 11-14.) If the print quality has
not improved, install a new drum unit. (See Replacing the drum unit on page
11-24.)
Hollow print
Make sure that you use paper that meets our specifications. (See About paper on
page 1-9.) Choose Thick paper mode in the printer driver or in the machine’s
Paper Type menu setting, or use thinner paper than you are currently using.
Check the machine’s environment because conditions such as high humidity can
cause hollow print. (See Choosing a location on page 1-2.)
Clean the primary corona wire on the drum unit. (See Cleaning the corona wire on
page 11-21.) If the print quality has not improved, install a new drum unit.
(See Replacing the drum unit on page 11-24.)
All black
Clean the primary corona wire on the drum unit. (See Cleaning the corona wire on
page 11-21.)
If the print quality has not improved, install a new drum unit. (See Replacing the
drum unit on page 11-24.)
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
C
DE
F
d
ef
g
BC
b
c
d
2
3
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234