Copier User Manual

Getting started
2 - 3
2
Setting the Phone Line Type
(For EU model only)
If you are connecting the machine to a line
that features a PABX (PBX) or ISDN to send
and receive faxes, it is also necessary to
change the Phone Line Type accordingly by
completing the following steps.
1 Press Menu/Set, 0, 5.
2 Press or to select PBX, ISDN (or
Normal).
Press Menu/Set.
3 Press Stop/Exit.
PABX (PBX) and TRANSFER
The machine is initially set to Normal, which
lets the machine connect to a standard PSTN
(Public Switched Telephone Network) line.
However, many offices use a central
telephone system or Private Automatic
Branch Exchange (PABX). Your machine can
be connected to most types of PABX (PBX).
The machine’s recall feature supports timed
break recall only (TBR). TBR will work with
most PABX (PBX) systems allowing you to
gain access to an outside line, or transfer
calls to another extension. The feature works
when Tel/R is pressed.
Note
You can program a Tel/R key press as
part of a number stored in a One-Touch or
Speed-Dial location. When programming the
One-Touch or Speed-Dial number (Menu/Set
2, 3, 1 or 2, 3, 2) press Tel/R first (the
screen displays "!"), then enter the telephone
number. If you do this, you do not need to
press Tel/R each time before you dial
using a One-Touch or Speed-Dial location.
(See Storing numbers for easy dialling on
page 5-1.) However, if PBX is not selected in
the Phone Line Type setting, you cannot use
the One-Touch or Speed-Dial number that
Tel/R press is programmed into.
5.Phone Line Set