Copier User Manual

Chapter 2
2 - 4
General Setup
Setting the Mode Timer
The machine has two temporary mode keys
on the control panel: Fax and Copy. You can
change the number of seconds or minutes
the machine takes after the last Copy
operation before it returns to Fax mode. If you
select Off, the machine stays in the mode
you used last.
1 Press Menu/Set, 1, 1.
2 Press ▲ or ▼ to select 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press Menu/Set.
3 Press Stop/Exit.
Setting the Paper Type
To get the best print quality, set the machine
for the type of paper you are using.
1 Press Menu/Set, 1, 2.
2 Press ▲ or ▼ to select Plain, Thin,
Thick, Thicker, Transprncy
(Transparency) or Recycled (Recycled
paper).
Press Menu/Set.
3 Press Stop/Exit.
Note
■ The machine ejects paper with printed
surfaces face down onto the output paper
tray in the front of the machine. When you
use transparencies or labels, remove
each sheet immediately to prevent
smudging or paper jams.
■ You can select Transprncy in Step 2 if
Letter, Legal or A4 paper size has
been selected (Menu/Set, 1, 3).
1.Mode Timer
2.Paper Type