Copier User Manual

Chapter 3
3 - 12
Setup for Polled Transmit
(Standard)
Polled Transmit is when you set up the
machine to wait with a document so another
fax machine can retrieve it.
Note
When someone polls your machine to
receive a fax, they pay for the call.
If you poll someone’s fax machine to
receive a fax, you pay for the call.
1 If it is not illuminated in green, press
(Fax).
2 Load your document.
3 Press Menu/Set, 2, 2, 6.
4 Press or to select Standard (For
EU and Asia/Oceania) or On (or Off)
(for USA and Canada).
Press Menu/Set.
Press 1 to leave the paper document
waiting in the ADF.
OR
Press 2 to scan the document into the
memory.
Note
If you press 1 in Step 4, the document
remains in the ADF until your machine is
polled. If you want to use the ADF before
the polled transmission occurs, you must
use Menu/Set, 2, 6 to cancel the job.
If you press 2 in Step 4, the document will
be stored in the machine’s memory and
can be retrieved from any other fax
machine until you delete the fax from
memory by using the Cancelling a Job
menu setting. (See Cancelling a
scheduled job on page 3-8.)
6.Polled TX
1.Doc 2.Memory