Copier User Manual

Chapter 5
5 - 3
Setting up Groups for
Broadcasting
Groups, which can be stored on a One-Touch
key or a Speed-Dial location, allow you to
send the same fax message to many fax
numbers by pressing only a One-Touch key
and Start or Search/Speed Dial, #,
the three-digit location and Start. First,
you’ll need to store each fax number as a
One-Touch or Speed-Dial number. Then, you
can combine them into a Group. Each Group
uses up a One-Touch key or a Speed-Dial
location. You can have up to eight Groups, or
you can assign up to 219 numbers to one
large Group.
(See Storing One-Touch numbers on page
5-1 and Storing Speed-Dial numbers on page
5-2.)
1 Press Menu/Set, 2, 3, 3.
2 Decide where you wish to store the
Group.
—AND—
Press a One-Touch key.
—OR—
Press Search/Speed Dial and
enter the three digit location, and then
press Menu/Set.
(For example, press One-Touch key 2,
or press Search/Speed Dial 0 4
5 for Speed-Dial location 045.)
3 Use the dial pad to enter the Group
number (1 to 8).
Press Menu/Set.
(For example, press 1 for Group 1.)
4 To include One-Touch or Speed-Dial
numbers in the Group, press them as
follows:
For example, for One-Touch number 4,
press One-Touch key 4. The LCD
shows 004. For Speed-Dial location
009, press Search/Speed Dial,
and then 0 0 9 on the dial pad.
5 Press Menu/Set to accept the numbers
for this Group.
6 Use the dial pad and the chart on page
B-11 to enter a name for the Group.
Press Menu/Set.
(For example, type NEW CLIENTS).
7 Press Stop/Exit.
Note
You can print a list of all One-Touch and
Speed-Dial numbers. Group numbers will be
marked in the GROUP column.
(See Printing reports on page 7-2.)
3.Setup Groups
Setup Group:G01
G01: 004#009