Copier User Manual

Remote Fax Options
6 - 2
6
Programming your pager
number (For USA and Canada
only)
When Paging is selected, your machine dials
the pager number you’ve programmed, and
then dials your Personal Identification
Number (PIN). This activates your pager so
you will know that you have a fax message in
the memory.
1 Press Menu/Set, 2, 5, 1.
2 Press ▲ or ▼ to select Paging.
Press Menu/Set.
3 Enter your pager phone number
followed by # # (up to 20 digits).
Press Menu/Set.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
4 If your pager needs a PIN, enter the PIN,
press #, press Redial/Pause, enter your
fax number followed by ##.
Press Menu/Set.
For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #
—OR—
If you do not need a PIN, press
Redial/Pause, enter your fax number
followed by ##.
Press Menu/Set.
For example, press:
Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #
5 Press Stop/Exit.
Note
■ You cannot change a Paging number or
PIN remotely.
■ If you have set Paging, a backup copy of
the received fax will automatically be
printed at the machine.
Turning off Remote Fax
Options
1 Press Menu/Set, 2, 5, 1.
(for EU and Asia/Oceania)
(for USA and Canada)
2 Press ▲ or ▼ to select Off.
Press Menu/Set.
3 Press Stop/Exit.
Note
If you set the remote fax options to Off and
received faxes are left in your machine’s
memory, further LCD messages appear after
Step 2. (See Changing Remote Fax Options.)
1.Fwd/Page/Store
1.Forward/Store
1.Fwd/Page/Store